[PATCH v5 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv

[CK Hu (胡俊光)]

Hi, Julien:

On Thu, 2024-07-04 at 15:36 +0200, Julien Stephan wrote:
>  	 
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>  From: Phi-bang Nguyen <pnguyen at baylibre.com>
> 
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
> 
> Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre at baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan at baylibre.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---

[snip]

> +static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq,
> +       unsigned int count)
> +{
> +struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> +struct mtk_cam_dev_buffer *buf;
> +struct mtk_cam_video_device *vdev =
> +vb2_queue_to_mtk_cam_video_device(vq);
> +struct device *dev = cam->dev;
> +const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> +int ret;
> +unsigned long flags;
> +
> +if (pm_runtime_get_sync(dev) < 0) {
> +dev_err(dev, "failed to get pm_runtime\n");
> +pm_runtime_put_autosuspend(dev);
> +return -1;
> +}
> +
> +(*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt->height,
> +fmt->plane_fmt[0].bytesperline, vdev->fmtinfo->code);
> +
> +
> +/* Enable CMOS and VF */
> +mtk_cam_cmos_vf_enable(cam, true, true);
> +
> +mutex_lock(&cam->op_lock);
> +
> +ret = mtk_cam_verify_format(cam);
> +if (ret < 0)
> +goto fail_unlock;
> +
> +/* Start streaming of the whole pipeline now*/
> +if (!cam->pipeline.start_count) {
> +ret = media_pipeline_start(vdev->vdev.entity.pads,
> +   &cam->pipeline);
> +if (ret) {
> +dev_err(dev, "failed to start pipeline:%d\n", ret);
> +goto fail_unlock;
> +}
> +}
> +
> +/* Media links are fixed after media_pipeline_start */
> +cam->stream_count++;
> +
> +cam->sequence = (unsigned int)-1;
> +
> +/* Stream on the sub-device */
> +ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1);
> +if (ret)
> +goto fail_no_stream;
> +
> +mutex_unlock(&cam->op_lock);
> +
> +/* Create dummy buffer */
> +cam->dummy_size = fmt->plane_fmt[0].sizeimage;
> +
> +cam->dummy.vaddr = dma_alloc_coherent(cam->dev, cam->dummy_size,
> +      &cam->dummy.daddr, GFP_KERNEL);

Dummy buffer cost much in DRAM footprint. I think we can get rid of
this dummy buffer. If no buffer is queued from user space, call
mtk_camsv30_cmos_vf_hw_disable() to stop write data into DRAM. After
buffer is queued from user space, call mtk_camsv30_cmos_vf_hw_enable()
to start write data into DRAM.

Regards,
CK

> +if (!cam->dummy.vaddr) {
> +ret = -ENOMEM;
> +goto fail_no_buffer;
> +}
> +
> +/* update first buffer address */
> +
> +/* added the buffer into the tracking list */
> +spin_lock_irqsave(&cam->irqlock, flags);
> +if (list_empty(&cam->buf_list)) {
> +(*cam->hw_functions->mtk_cam_update_buffers_add)(cam, &cam->dummy);
> +cam->is_dummy_used = true;
> +} else {
> +buf = list_first_entry_or_null(&cam->buf_list,
> +       struct mtk_cam_dev_buffer,
> +       list);
> +(*cam->hw_functions->mtk_cam_update_buffers_add)(cam, buf);
> +cam->is_dummy_used = false;
> +}
> +spin_unlock_irqrestore(&cam->irqlock, flags);
> +
> +return 0;
> +
> +fail_no_buffer:
> +mutex_lock(&cam->op_lock);
> +v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
> +fail_no_stream:
> +cam->stream_count--;
> +if (cam->stream_count == 0)
> +media_pipeline_stop(vdev->vdev.entity.pads);
> +fail_unlock:
> +mutex_unlock(&cam->op_lock);
> +mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED);
> +
> +return ret;
> +}
> +