[PATCH V3 05/15] clk: imx: imx8mp-audiomix: remove sdma root clock

[Peng Fan]

> Subject: Re: [PATCH V3 05/15] clk: imx: imx8mp-audiomix: remove
> sdma root clock
> 
> On Fri, Jun 7, 2024 at 8:28 AM Peng Fan (OSS) <peng.fan at oss.nxp.com>
> wrote:
> >
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > There is an issue:
> > SDMA3 can't work without setting AUDIOMIX_CLKEN0[SDMA2] (bit-
> 26) to 1
> >
> > The workaround is:
> > As the reset state of AUDIOMIX_CLKEN0[SDMA2] is enabled, we just
> need
> > to keep it on as reset state, don't touch it in kernel, then every
> > thing is same as before, if we register the clock in clk-audiomix,
> > then kernel will try to disable it in idle.
> >
> > Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block
> control")
> > Reviewed-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> 
> With this patch,I found it broke the imx8mp-beacon board when
> running audio through a codec connected to sai3.  Reverting this patch
> made the crash go away.  Is there a way to mark the clock as critical so
> it doesn't get idled?

Mark it as critical means the blk ctrl needs to be powered on always.

You driver touched the SDMA2_ROOT clock?

Regards,
Peng.

> 
> adam
> >  drivers/clk/imx/clk-imx8mp-audiomix.c | 1 -
> >  1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/clk/imx/clk-imx8mp-audiomix.c
> > b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > index b381d6f784c8..88d8ba975b5a 100644
> > --- a/drivers/clk/imx/clk-imx8mp-audiomix.c
> > +++ b/drivers/clk/imx/clk-imx8mp-audiomix.c
> > @@ -172,7 +172,6 @@ static struct clk_imx8mp_audiomix_sel sels[]
> = {
> >         CLK_GATE("ocrama", OCRAMA_IPG),
> >         CLK_GATE("aud2htx", AUD2HTX_IPG),
> >         CLK_GATE("earc_phy", EARC_PHY),
> > -       CLK_GATE("sdma2", SDMA2_ROOT),
> >         CLK_GATE("sdma3", SDMA3_ROOT),
> >         CLK_GATE("spba2", SPBA2_ROOT),
> >         CLK_GATE("dsp", DSP_ROOT),
> > --
> > 2.37.1
> >
> >