[PATCH] clk: at91: sama7g5: Allocate only the needed amount of memory for PLLs

[Claudiu Beznea]

The maximum number of PLL components on SAMA7G5 is 3 (one fractional
part and 2 dividers). Allocate the needed amount of memory for
sama7g5_plls 2d array. Previous code used to allocate 7 array entries for
each PLL. While at it, replace 3 with PLL_COMPID_MAX in the loop which
parses the sama7g5_plls 2d array.

Signed-off-by: Claudiu Beznea <claudiu.beznea at tuxon.dev>
---
 drivers/clk/at91/sama7g5.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 6706d1305baa..8385badc1c70 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -51,6 +51,7 @@ enum pll_component_id {
 	PLL_COMPID_FRAC,
 	PLL_COMPID_DIV0,
 	PLL_COMPID_DIV1,
+	PLL_COMPID_MAX,
 };
 
 /*
@@ -157,7 +158,7 @@ static struct sama7g5_pll {
 	u8 t;
 	u8 eid;
 	u8 safe_div;
-} sama7g5_plls[][PLL_ID_MAX] = {
+} sama7g5_plls[][PLL_COMPID_MAX] = {
 	[PLL_ID_CPU] = {
 		[PLL_COMPID_FRAC] = {
 			.n = "cpupll_fracck",
@@ -1030,7 +1031,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
 	sama7g5_pmc->chws[PMC_MAIN] = hw;
 
 	for (i = 0; i < PLL_ID_MAX; i++) {
-		for (j = 0; j < 3; j++) {
+		for (j = 0; j < PLL_COMPID_MAX; j++) {
 			struct clk_hw *parent_hw;
 
 			if (!sama7g5_plls[i][j].n)
-- 
2.39.2