[PATCH] arm64: dts: ti: Introduce J742S2 SoC and EVM

[Krzysztof Kozlowski]

On 11/07/2024 07:26, Manorit Chawdhry wrote:
> This series add the Linux support for our new family of device J742S2.

This is a patch, not series. What Linux support are you adding? Where is
it? I see only DTS, not Linux support.

Please do not use "This commit/patch/change", but imperative mood. See
longer explanation here:
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95



> This device is a subset of J784S4 and shares the same memory map and
> thus the nodes are being reused from J784S4 to avoid duplication.
> 
> Here are some of the salient features of the J742S2 automotive grade
> application processor:
> 
> The J742S2 SoC belongs to the K3 Multicore SoC architecture platform,
> providing advanced system integration in automotive, ADAS and industrial
> applications requiring AI at the network edge. This SoC extends the K3
> Jacinto 7 family of SoCs with focus on raising performance and
> integration while providing interfaces, memory architecture and compute
> performance for multi-sensor, high concurrency applications.
> 
> Some highlights of this SoC are:
> * Up to Four Arm® Cortex®-A72 microprocessor subsystem at up to 2.0GHz,
>   3 C7x floating point vector DSPs with Up to Two Deep-learning matrix
>   multiply accelerator (MMAv2),
> * 3D GPU: Automotive grade IMG BXS-4-64 MC1
> * Vision Processing Accelerator (VPAC) with image signal processor and
>   Depth and Motion Processing Accelerator (DMPAC)
> * Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and
>   one DPI interface.
> * Integrated gigabit ethernet switch, up to 4 ports ,two ports
>   support 10Gb USXGMII; One 4 lane PCIe-GEN3 controllers, USB3.0
>   Dual-role device subsystems, Up to 20 MCANs, among other peripherals.

Clean this up from marketing.

> 
> ( Refer Table 2-1 for Device comparison with J7AHP )
> 
> Link: https://www.ti.com/lit/pdf/spruje3 (TRM)
> Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
> Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
> ---
> The series adds support for J742S2 family of SoCs. Also adds J742S2 EVM
> Support and re-uses most of the stuff from the superset device J784s4.
> 
> Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
> ---
>  arch/arm64/boot/dts/ti/Makefile            |  3 ++
>  arch/arm64/boot/dts/ti/k3-j742s2-evm.dts   | 22 ++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j742s2-main.dtsi | 47 ++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j742s2.dtsi      | 18 ++++++++++++
>  4 files changed, 90 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index e20b27ddf901..4d0688c5cff7 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -119,6 +119,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
>  dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
>  
> +# Boards with J742S2 SoC
> +dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
> +
>  # Build time test only, enabled by CONFIG_OF_ALL_DTBS
>  k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
>  	k3-am625-beagleplay-csi2-ov5640.dtbo
> diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
> new file mode 100644
> index 000000000000..98088ccfd76d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
> + *
> + * EVM Board Schematics: https://www.ti.com/lit/zip/SPAC001
> + */
> +
> +#include "k3-j784s4-evm.dts"
> +#include "k3-j742s2.dtsi"
> +
> +/delete-node/ &c71_3_dma_memory_region;
> +/delete-node/ &c71_3_memory_region;
> +
> +/ {
> +	model = "Texas Instruments J742S2 EVM";

Missing compatible and bindings.

Best regards,
Krzysztof