[PATCH v3 02/12] dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC

[Krzysztof Kozlowski]

On 11/07/2024 00:16, Jim Quinlan wrote:
> o Change order of the compatible strings to be alphabetical

That's a cleanup. You can squash it with previous patch.

> o Describe resets/reset-names before using them in rules

That's a new commit.

> o Add in new resets for 7712 (swinit, bridge)
> o Add in changes for 7712
> 
> Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 46 +++++++++++++++++--
>  1 file changed, 41 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> index 558a18fd2e77..dd7c76ec9ceb 100644
> --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -16,11 +16,12 @@ properties:
>            - brcm,bcm2711-pcie # The Raspberry Pi 4
>            - brcm,bcm4908-pcie
>            - brcm,bcm7211-pcie # Broadcom STB version of RPi4
> -          - brcm,bcm7278-pcie # Broadcom 7278 Arm
>            - brcm,bcm7216-pcie # Broadcom 7216 Arm
> -          - brcm,bcm7445-pcie # Broadcom 7445 Arm
> +          - brcm,bcm7278-pcie # Broadcom 7278 Arm
>            - brcm,bcm7425-pcie # Broadcom 7425 MIPs
>            - brcm,bcm7435-pcie # Broadcom 7435 MIPs
> +          - brcm,bcm7445-pcie # Broadcom 7445 Arm
> +          - brcm,bcm7712-pcie # STB sibling SOC of Raspberry Pi 5
>  
>    reg:
>      maxItems: 1
> @@ -95,6 +96,20 @@ properties:
>        minItems: 1
>        maxItems: 3
>  
> +  resets:

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>

minItems

> +    items:
> +      - description: reset for phy reset calibration
> +      - description: reset for PCIe/CPU bus bridge
> +      - description: reset for soft PCIe core reset
> +      - description: reset for external PCIe PERST# signal
> +
> +  reset-names:

Same here

> +    items:
> +      - const: rescal
> +      - const: bridge
> +      - const: swinit
> +      - const: perst



Best regards,
Krzysztof