[PATCH v2 7/8] firmware: arm_scmi: Make VirtIO transport a standalone driver
Cristian Marussi
cristian.marussi at arm.com
Wed Jul 10 10:31:52 PDT 2024
Make SCMI VirtIO transport a standalone driver that can be optionally
loaded as a module.
CC: Michael S. Tsirkin <mst at redhat.com>
CC: Igor Skalkin <igor.skalkin at opensynergy.com>
CC: Peter Hilber <peter.hilber at opensynergy.com>
Signed-off-by: Cristian Marussi <cristian.marussi at arm.com>
---
v1 --> v2
- handle platform_driver_register() failures
- make scmi_virtio_desc static
| Reported-by: kernel test robot <lkp at intel.com>
| Closes:
https://lore.kernel.org/oe-kbuild-all/202407081344.9OceqFie-lkp@intel.com/
---
drivers/firmware/arm_scmi/Kconfig | 6 +-
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/common.h | 3 -
drivers/firmware/arm_scmi/driver.c | 3 -
.../{virtio.c => scmi_transport_virtio.c} | 103 +++++++++---------
5 files changed, 59 insertions(+), 58 deletions(-)
rename drivers/firmware/arm_scmi/{virtio.c => scmi_transport_virtio.c} (94%)
diff --git a/drivers/firmware/arm_scmi/Kconfig b/drivers/firmware/arm_scmi/Kconfig
index def7e3f09356..c18d86e9d8d7 100644
--- a/drivers/firmware/arm_scmi/Kconfig
+++ b/drivers/firmware/arm_scmi/Kconfig
@@ -132,8 +132,8 @@ config ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE
primitives all over instead. If unsure say N.
config ARM_SCMI_TRANSPORT_VIRTIO
- bool "SCMI transport based on VirtIO"
- depends on VIRTIO=y || VIRTIO=ARM_SCMI_PROTOCOL
+ tristate "SCMI transport based on VirtIO"
+ depends on VIRTIO
select ARM_SCMI_HAVE_TRANSPORT
select ARM_SCMI_HAVE_MSG
help
@@ -141,6 +141,8 @@ config ARM_SCMI_TRANSPORT_VIRTIO
If you want the ARM SCMI PROTOCOL stack to include support for a
transport based on VirtIO, answer Y.
+ This driver can also be built as a module. If so, the module
+ will be called scmi_transport_virtio.
config ARM_SCMI_TRANSPORT_VIRTIO_VERSION1_COMPLIANCE
bool "SCMI VirtIO transport Version 1 compliance"
diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile
index b04119ce972f..846b4939258d 100644
--- a/drivers/firmware/arm_scmi/Makefile
+++ b/drivers/firmware/arm_scmi/Makefile
@@ -6,12 +6,12 @@ scmi-driver-y = driver.o notify.o
scmi-driver-$(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
-scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
scmi-protocols-y := base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o
scmi-protocols-y += pinctrl.o
scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y)
obj-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += scmi_transport_smc.o
+obj-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += scmi_transport_virtio.o
obj-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += scmi_transport_mailbox.o
obj-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += scmi_transport_optee.o
diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h
index 0ce1d804b3fc..28d52b9102c3 100644
--- a/drivers/firmware/arm_scmi/common.h
+++ b/drivers/firmware/arm_scmi/common.h
@@ -286,9 +286,6 @@ int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer,
unsigned int timeout_ms);
-#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
-extern const struct scmi_desc scmi_virtio_desc;
-#endif
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
index 67b416c7f2f5..2a1f87c97abe 100644
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -3251,9 +3251,6 @@ ATTRIBUTE_GROUPS(versions);
/* Each compatible listed below must have descriptor associated with it */
static const struct of_device_id scmi_of_match[] = {
-#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
- { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
-#endif
{ /* Sentinel */ },
};
diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/scmi_transport_virtio.c
similarity index 94%
rename from drivers/firmware/arm_scmi/virtio.c
rename to drivers/firmware/arm_scmi/scmi_transport_virtio.c
index 736a0d41a458..cc6a77ce5a9d 100644
--- a/drivers/firmware/arm_scmi/virtio.c
+++ b/drivers/firmware/arm_scmi/scmi_transport_virtio.c
@@ -3,8 +3,8 @@
* Virtio Transport driver for Arm System Control and Management Interface
* (SCMI).
*
- * Copyright (C) 2020-2022 OpenSynergy.
- * Copyright (C) 2021-2022 ARM Ltd.
+ * Copyright (C) 2020-2024 OpenSynergy.
+ * Copyright (C) 2021-2024 ARM Ltd.
*/
/**
@@ -19,6 +19,7 @@
#include <linux/completion.h>
#include <linux/errno.h>
+#include <linux/platform_device.h>
#include <linux/refcount.h>
#include <linux/slab.h>
#include <linux/virtio.h>
@@ -108,6 +109,8 @@ struct scmi_vio_msg {
refcount_t users;
};
+static struct scmi_transport_core_operations *core;
+
/* Only one SCMI VirtIO device can possibly exist */
static struct virtio_device *scmi_vdev;
@@ -294,8 +297,9 @@ static void scmi_vio_complete_cb(struct virtqueue *vqueue)
if (msg) {
msg->rx_len = length;
- scmi_rx_callback(vioch->cinfo,
- scmi_msg_ops.read_header(msg->input), msg);
+ core->rx_callback(vioch->cinfo,
+ core->msg->read_header(msg->input),
+ msg);
scmi_finalize_message(vioch, msg);
}
@@ -339,8 +343,9 @@ static void scmi_vio_deferred_tx_worker(struct work_struct *work)
* is no more processed elsewhere so no poll_lock needed.
*/
if (msg->poll_status == VIO_MSG_NOT_POLLED)
- scmi_rx_callback(vioch->cinfo,
- scmi_msg_ops.read_header(msg->input), msg);
+ core->rx_callback(vioch->cinfo,
+ core->msg->read_header(msg->input),
+ msg);
/* Free the processed message once done */
scmi_vio_msg_release(vioch, msg);
@@ -368,23 +373,6 @@ static unsigned int virtio_get_max_msg(struct scmi_chan_info *base_cinfo)
return vioch->max_msg;
}
-static int virtio_link_supplier(struct device *dev)
-{
- if (!scmi_vdev) {
- dev_notice(dev,
- "Deferring probe after not finding a bound scmi-virtio device\n");
- return -EPROBE_DEFER;
- }
-
- if (!device_link_add(dev, &scmi_vdev->dev,
- DL_FLAG_AUTOREMOVE_CONSUMER)) {
- dev_err(dev, "Adding link to supplier virtio device failed\n");
- return -ECANCELED;
- }
-
- return 0;
-}
-
static bool virtio_chan_available(struct device_node *of_node, int idx)
{
struct scmi_vio_channel *channels, *vioch = NULL;
@@ -512,10 +500,10 @@ static int virtio_send_message(struct scmi_chan_info *cinfo,
return -EBUSY;
}
- scmi_msg_ops.tx_prepare(msg->request, xfer);
+ core->msg->tx_prepare(msg->request, xfer);
- sg_init_one(&sg_out, msg->request, scmi_msg_ops.command_size(xfer));
- sg_init_one(&sg_in, msg->input, scmi_msg_ops.response_size(xfer));
+ sg_init_one(&sg_out, msg->request, core->msg->command_size(xfer));
+ sg_init_one(&sg_in, msg->input, core->msg->response_size(xfer));
spin_lock_irqsave(&vioch->lock, flags);
@@ -562,7 +550,7 @@ static void virtio_fetch_response(struct scmi_chan_info *cinfo,
struct scmi_vio_msg *msg = xfer->priv;
if (msg)
- scmi_msg_ops.fetch_response(msg->input, msg->rx_len, xfer);
+ core->msg->fetch_response(msg->input, msg->rx_len, xfer);
}
static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
@@ -571,7 +559,8 @@ static void virtio_fetch_notification(struct scmi_chan_info *cinfo,
struct scmi_vio_msg *msg = xfer->priv;
if (msg)
- scmi_msg_ops.fetch_notification(msg->input, msg->rx_len, max_len, xfer);
+ core->msg->fetch_notification(msg->input, msg->rx_len,
+ max_len, xfer);
}
/**
@@ -671,7 +660,7 @@ static void virtio_mark_txdone(struct scmi_chan_info *cinfo, int ret,
* the message we are polling for could be alternatively delivered via usual
* IRQs callbacks on another core which happened to have IRQs enabled while we
* are actively polling for it here: in such a case it will be handled as such
- * by scmi_rx_callback() and the polling loop in the SCMI Core TX path will be
+ * by rx_callback() and the polling loop in the SCMI Core TX path will be
* transparently terminated anyway.
*
* Return: True once polling has successfully completed.
@@ -792,7 +781,6 @@ static bool virtio_poll_done(struct scmi_chan_info *cinfo,
}
static const struct scmi_transport_ops scmi_virtio_ops = {
- .link_supplier = virtio_link_supplier,
.chan_available = virtio_chan_available,
.chan_setup = virtio_chan_setup,
.chan_free = virtio_chan_free,
@@ -804,6 +792,22 @@ static const struct scmi_transport_ops scmi_virtio_ops = {
.poll_done = virtio_poll_done,
};
+static const struct scmi_desc scmi_virtio_desc = {
+ .ops = &scmi_virtio_ops,
+ /* for non-realtime virtio devices */
+ .max_rx_timeout_ms = VIRTIO_MAX_RX_TIMEOUT_MS,
+ .max_msg = 0, /* overridden by virtio_get_max_msg() */
+ .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
+ .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE),
+};
+
+static const struct of_device_id scmi_of_match[] = {
+ { .compatible = "arm,scmi-virtio" },
+ { /* Sentinel */ },
+};
+
+DEFINE_SCMI_TRANSPORT_DRIVER(scmi_virtio, scmi_of_match, &core);
+
static int scmi_vio_probe(struct virtio_device *vdev)
{
struct device *dev = &vdev->dev;
@@ -864,14 +868,27 @@ static int scmi_vio_probe(struct virtio_device *vdev)
}
vdev->priv = channels;
+
/* Ensure initialized scmi_vdev is visible */
smp_store_mb(scmi_vdev, vdev);
+ ret = platform_driver_register(&scmi_virtio_driver);
+ if (ret) {
+ vdev->priv = NULL;
+ vdev->config->del_vqs(vdev);
+ /* Ensure NULLified scmi_vdev is visible */
+ smp_store_mb(scmi_vdev, NULL);
+
+ return ret;
+ }
+
return 0;
}
static void scmi_vio_remove(struct virtio_device *vdev)
{
+ platform_driver_unregister(&scmi_virtio_driver);
+
/*
* Once we get here, virtio_chan_free() will have already been called by
* the SCMI core for any existing channel and, as a consequence, all the
@@ -916,23 +933,11 @@ static struct virtio_driver virtio_scmi_driver = {
.validate = scmi_vio_validate,
};
-static int __init virtio_scmi_init(void)
-{
- return register_virtio_driver(&virtio_scmi_driver);
-}
-
-static void virtio_scmi_exit(void)
-{
- unregister_virtio_driver(&virtio_scmi_driver);
-}
+module_virtio_driver(virtio_scmi_driver);
-const struct scmi_desc scmi_virtio_desc = {
- .transport_init = virtio_scmi_init,
- .transport_exit = virtio_scmi_exit,
- .ops = &scmi_virtio_ops,
- /* for non-realtime virtio devices */
- .max_rx_timeout_ms = VIRTIO_MAX_RX_TIMEOUT_MS,
- .max_msg = 0, /* overridden by virtio_get_max_msg() */
- .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE,
- .atomic_enabled = IS_ENABLED(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO_ATOMIC_ENABLE),
-};
+MODULE_ALIAS("scmi-transport-virtio");
+MODULE_AUTHOR("Igor Skalkin <igor.skalkin at opensynergy.com>");
+MODULE_AUTHOR("Peter Hilber <peter.hilber at opensynergy.com>");
+MODULE_AUTHOR("Cristian Marussi <cristian.marussi at arm.com>");
+MODULE_DESCRIPTION("SCMI VirtIO Transport driver");
+MODULE_LICENSE("GPL");
--
2.45.2
More information about the linux-arm-kernel
mailing list