[PATCH net-next v1 7/7] net: stmmac: xgmac: enable Frame Preemption Interrupt by default

[Furong Xu]

Frame Preemption Interrupt is required to finish FPE handshake.

XGMAC_FPEIE is read-only reserved if FPE is not supported by HW.
There is no harm that we always set XGMAC_FPEIE bit.

Signed-off-by: Furong Xu <0x1207 at gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index c66fa6040672..f359d70beb83 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -96,10 +96,11 @@
 #define XGMAC_LPIIS			BIT(5)
 #define XGMAC_PMTIS			BIT(4)
 #define XGMAC_INT_EN			0x000000b4
+#define XGMAC_FPEIE			BIT(15)
 #define XGMAC_TSIE			BIT(12)
 #define XGMAC_LPIIE			BIT(5)
 #define XGMAC_PMTIE			BIT(4)
-#define XGMAC_INT_DEFAULT_EN		(XGMAC_LPIIE | XGMAC_PMTIE)
+#define XGMAC_INT_DEFAULT_EN		(XGMAC_FPEIE | XGMAC_LPIIE | XGMAC_PMTIE)
 #define XGMAC_Qx_TX_FLOW_CTRL(x)	(0x00000070 + (x) * 4)
 #define XGMAC_PT			GENMASK(31, 16)
 #define XGMAC_PT_SHIFT			16
-- 
2.34.1