[PATCH net-next v17 00/14] Introduce PHY listing and link_topology tracking
Maxime Chevallier
maxime.chevallier at bootlin.com
Mon Jul 8 23:30:23 PDT 2024
Hello everyone,
This is V17 of the phy_link_topology series, aiming at improving support
for multiple PHYs being attached to the same MAC.
V17 is mostly a rebase of V16 on net-next, as the addition of new
features in the PSE-PD command raised a conflict on the ethtool netlink
spec, and patch 10 was updated :
("net: ethtool: pse-pd: Target the command to the requested PHY")
The new code was updated to make use of the new helpers to retrieve the
PHY from the ethnl request, and an error message was also updated to
better reflect the fact that we don't only rely on the attached PHY for
configuration.
As a remainder, here's what the PHY listings would look like :
- eth0 has a 88x3310 acting as media converter, and an SFP module with
an embedded 88e1111 PHY
- eth2 has a 88e1510 PHY
# ethtool --show-phys *
PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
Upstream type: MAC
PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0
PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
Upstream type: MAC
Ethtool patches : https://github.com/minimaxwell/ethtool/tree/mc/topo-v16
Link to V16: https://lore.kernel.org/netdev/20240705132706.13588-1-maxime.chevallier@bootlin.com/
Link to V15: https://lore.kernel.org/netdev/20240703140806.271938-1-maxime.chevallier@bootlin.com/
Link to V14: https://lore.kernel.org/netdev/20240701131801.1227740-1-maxime.chevallier@bootlin.com/
Link to V13: https://lore.kernel.org/netdev/20240607071836.911403-1-maxime.chevallier@bootlin.com/
Link to v12: https://lore.kernel.org/netdev/20240605124920.720690-1-maxime.chevallier@bootlin.com/
Link to v11: https://lore.kernel.org/netdev/20240404093004.2552221-1-maxime.chevallier@bootlin.com/
Link to V10: https://lore.kernel.org/netdev/20240304151011.1610175-1-maxime.chevallier@bootlin.com/
Link to V9: https://lore.kernel.org/netdev/20240228114728.51861-1-maxime.chevallier@bootlin.com/
Link to V8: https://lore.kernel.org/netdev/20240220184217.3689988-1-maxime.chevallier@bootlin.com/
Link to V7: https://lore.kernel.org/netdev/20240213150431.1796171-1-maxime.chevallier@bootlin.com/
Link to V6: https://lore.kernel.org/netdev/20240126183851.2081418-1-maxime.chevallier@bootlin.com/
Link to V5: https://lore.kernel.org/netdev/20231221180047.1924733-1-maxime.chevallier@bootlin.com/
Link to V4: https://lore.kernel.org/netdev/20231215171237.1152563-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20231201163704.1306431-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20231117162323.626979-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20230907092407.647139-1-maxime.chevallier@bootlin.com/
More discussions on specific issues that happened in 6.9-rc:
https://lore.kernel.org/netdev/20240412104615.3779632-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240429131008.439231-1-maxime.chevallier@bootlin.com/
https://lore.kernel.org/netdev/20240507102822.2023826-1-maxime.chevallier@bootlin.com/
Maxime Chevallier (14):
net: phy: Introduce ethernet link topology representation
net: sfp: pass the phy_device when disconnecting an sfp module's PHY
net: phy: add helpers to handle sfp phy connect/disconnect
net: sfp: Add helper to return the SFP bus name
net: ethtool: Allow passing a phy index for some commands
netlink: specs: add phy-index as a header parameter
net: ethtool: Introduce a command to list PHYs on an interface
netlink: specs: add ethnl PHY_GET command set
net: ethtool: plca: Target the command to the requested PHY
net: ethtool: pse-pd: Target the command to the requested PHY
net: ethtool: cable-test: Target the command to the requested PHY
net: ethtool: strset: Remove unnecessary check on genl_info
net: ethtool: strset: Allow querying phy stats by index
Documentation: networking: document phy_link_topology
Documentation/netlink/specs/ethtool.yaml | 58 ++++
Documentation/networking/ethtool-netlink.rst | 51 +++
Documentation/networking/index.rst | 1 +
.../networking/phy-link-topology.rst | 121 +++++++
MAINTAINERS | 1 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 2 +
drivers/net/phy/marvell10g.c | 2 +
drivers/net/phy/phy_device.c | 48 +++
drivers/net/phy/phy_link_topology.c | 105 ++++++
drivers/net/phy/phylink.c | 3 +-
drivers/net/phy/qcom/at803x.c | 2 +
drivers/net/phy/qcom/qca807x.c | 2 +
drivers/net/phy/sfp-bus.c | 26 +-
include/linux/netdevice.h | 4 +-
include/linux/phy.h | 6 +
include/linux/phy_link_topology.h | 82 +++++
include/linux/sfp.h | 8 +-
include/uapi/linux/ethtool.h | 16 +
include/uapi/linux/ethtool_netlink.h | 20 ++
net/core/dev.c | 15 +
net/ethtool/Makefile | 3 +-
net/ethtool/cabletest.c | 35 +-
net/ethtool/netlink.c | 66 +++-
net/ethtool/netlink.h | 33 ++
net/ethtool/phy.c | 308 ++++++++++++++++++
net/ethtool/plca.c | 30 +-
net/ethtool/pse-pd.c | 31 +-
net/ethtool/strset.c | 27 +-
30 files changed, 1057 insertions(+), 53 deletions(-)
create mode 100644 Documentation/networking/phy-link-topology.rst
create mode 100644 drivers/net/phy/phy_link_topology.c
create mode 100644 include/linux/phy_link_topology.h
create mode 100644 net/ethtool/phy.c
--
2.45.1
More information about the linux-arm-kernel
mailing list