[PATCH v2 2/4] dt-bindings: arm: Add binding document for Coresight Control Unit device.

[Suzuki K Poulose]

On 05/07/2024 10:00, Jie Gan wrote:
> Add binding document for Coresight Control Unit device.

nit: This is again too generic ? corsight-tmc-control-unit ? After all
thats what it is and not a *generic* coresight control unit ?

> 
> Signed-off-by: Jie Gan <quic_jiegan at quicinc.com>
> ---
>   .../bindings/arm/qcom,coresight-ccu.yaml      | 87 +++++++++++++++++++
>   1 file changed, 87 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-ccu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ccu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ccu.yaml
> new file mode 100644
> index 000000000000..9bb8ced393a7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ccu.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/qcom,coresight-ccu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: CoreSight Control Unit
> +
> +maintainers:
> +  - Yuanfang Zhang <quic_yuanfang at quicinc.com>
> +  - Mao Jinlong <quic_jinlmao at quicinc.com>
> +  - Jie Gan <quic_jiegan at quicinc.com>
> +
> +description:
> +  The Coresight Control unit controls various Coresight behaviors.
> +  Used to enable/disable ETR’s data filter function based on trace ID.
> +
> +properties:
> +  compatible:
> +    const: qcom,coresight-ccu
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: apb_pclk
> +
> +  reg-names:
> +    items:
> +      - const: ccu-base
> +
> +  in-ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    unevaluatedProperties:
> +      patternProperties:
> +        '^port(@[0-7])?$':
> +          description: Input connections from CoreSight Trace bus
> +          $ref: /schemas/graph.yaml#/properties/port
> +
> +          properties:
> +            qcom,ccu-atid-offset:

Why do we need this atid offset ? Couldn't this be mapped to the "port"
number ?

e.g, input-port 0 on CCU => Offset x
      input-port 1 on CCU => (Offset x + Size of 1 region)

I believe I mentioned this in the previous posting too ?

Suzuki