[PATCH v2] arm64: dts: freescale: imx8mp-phycore: Add no-eth overlay

[Benjamin Hahn]

Add a devicetree overlay to disable ethernet for boards where it is not
populated.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
Changes in v2:
- Remove the compatible from the overlay
- Link to v1: https://lore.kernel.org/r/20240703-bspimx8m-3180-v1-1-e43e035a9b2a@phytec.de
---
 arch/arm64/boot/dts/freescale/Makefile                   |  2 ++
 arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso | 16 ++++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2cb0212b63c6..16e06e6f055c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -164,6 +164,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
new file mode 100644
index 000000000000..5f0278bf61ee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-no-eth.dtso
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ * Author: Cem Tenruh <c.tenruh at phytec.de>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&ethphy1 {
+	status = "disabled";
+};
+
+&fec {
+	status = "disabled";
+};

---
base-commit: e8f897f4afef0031fe618a8e94127a0934896aba
change-id: 20240617-bspimx8m-3180-47bed184a854

Best regards,
-- 
Benjamin Hahn <B.Hahn at phytec.de>