[PATCH v2 3/4] Coresight: Add Coresight Control Unit driver
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Fri Jul 5 02:11:19 PDT 2024
On 05/07/2024 11:00, Jie Gan wrote:
> The Coresight Control Unit hosts miscellaneous configuration registers
> which control various features related to TMC ETR sink.
>
> Based on the trace ID, which is programmed in the related CCU ATID register
> of a specific ETR, trace data with that trace ID gets into the ETR buffer,
....
> +static int ccu_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct coresight_platform_data *pdata;
> + struct ccu_drvdata *drvdata;
> + struct coresight_desc desc = { 0 };
> + struct resource *res;
> +
> + desc.name = coresight_alloc_device_name(&ccu_devs, dev);
> + if (!desc.name)
> + return -ENOMEM;
> + pdata = coresight_get_platform_data(dev);
> + if (IS_ERR(pdata))
> + return PTR_ERR(pdata);
> + pdev->dev.platform_data = pdata;
> +
> + drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
> + if (!drvdata)
> + return -ENOMEM;
> + drvdata->dev = &pdev->dev;
Use stored dev variable.
> + drvdata->atid_offset = 0;
> + platform_set_drvdata(pdev, drvdata);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccu-base");
> + if (!res)
> + return -ENODEV;
> + drvdata->pbase = res->start;
Drop.
> +
> + drvdata->base = devm_ioremap(dev, res->start, resource_size(res));
Use proper wrapper for this two.
> + if (!drvdata->base)
> + return -ENOMEM;
> +
> + desc.type = CORESIGHT_DEV_TYPE_HELPER;
> + desc.pdata = pdev->dev.platform_data;
> + desc.dev = &pdev->dev;
> + desc.ops = &ccu_ops;
> +
> + drvdata->csdev = coresight_register(&desc);
> + if (IS_ERR(drvdata->csdev))
> + return PTR_ERR(drvdata->csdev);
> +
> + dev_dbg(dev, "CCU initialized: %s\n", desc.name);
Drop.
> + return 0;
> +}
> +
> +static void ccu_remove(struct platform_device *pdev)
> +{
> + struct ccu_drvdata *drvdata = platform_get_drvdata(pdev);
> +
> + coresight_unregister(drvdata->csdev);
> +}
> +
> +static const struct of_device_id ccu_match[] = {
> + {.compatible = "qcom,coresight-ccu"},
> + {}
> +};
> +
> +static struct platform_driver ccu_driver = {
> + .probe = ccu_probe,
> + .remove = ccu_remove,
> + .driver = {
> + .name = "coresight-ccu",
> + .of_match_table = ccu_match,
> + .suppress_bind_attrs = true,
Why?
> + },
> +};
> +
> +static int __init ccu_init(void)
> +{
> + return platform_driver_register(&ccu_driver);
> +}
> +module_init(ccu_init);
> +
> +static void __exit ccu_exit(void)
> +{
> + platform_driver_unregister(&ccu_driver);
> +}
> +module_exit(ccu_exit);
Why this is not just module platform driver?
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list