[PATCH v2 09/12] PCI: brcmstb: Refactor for chips with many regular inbound BARs

[Stanimir Varbanov]

Hi Jim,

On 7/3/24 21:02, Jim Quinlan wrote:
> Previously, our chips provided three inbound "BARS" with fixed purposes:
> the first was for mapping SOC registers, the second was for memory, and the
> third was for memory but with the endian swapped.  We typically only used
> one of these BARs.
> 
> Complicating that BARs usage was the fact that the PCIe HW would do a
> baroque internal mapping of system memory, and concatenate the regions of
> multiple memory controllers.
> 
> Newer chips such as the 7712 and Cable Modem SOCs have taken a step forward
> and now provide multiple inbound BARs.  This works in concert with the
> dma-ranges property, where each provided range becomes an inbound BAR.
> 
> This commit provides support for these new chips and their multiple
> inbound BARs but also keeps the legacy support for the older system.
> 
> Signed-off-by: Jim Quinlan <james.quinlan at broadcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 199 +++++++++++++++++++-------
>  1 file changed, 150 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index ffb3e8d8fb2a..5f632fdc0052 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -75,15 +75,12 @@
>  #define PCIE_MEM_WIN0_HI(win)	\
>  		PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8)
>  
> +#define PCIE_BRCM_MAX_RC_BARS				16
>  #define PCIE_MISC_RC_BAR1_CONFIG_LO			0x402c
>  #define  PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK		0x1f
>  
> -#define PCIE_MISC_RC_BAR2_CONFIG_LO			0x4034
> -#define  PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK		0x1f
> -#define PCIE_MISC_RC_BAR2_CONFIG_HI			0x4038
> +#define PCIE_MISC_RC_BAR4_CONFIG_LO			0x40d4
>  
> -#define PCIE_MISC_RC_BAR3_CONFIG_LO			0x403c
> -#define  PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK		0x1f
>  
>  #define PCIE_MISC_MSI_BAR_CONFIG_LO			0x4044
>  #define PCIE_MISC_MSI_BAR_CONFIG_HI			0x4048
> @@ -130,6 +127,10 @@
>  	  (PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK | \
>  	   PCIE_MISC_HARD_PCIE_HARD_DEBUG_L1SS_ENABLE_MASK)
>  
> +#define PCIE_MISC_UBUS_BAR1_CONFIG_REMAP			0x40ac
> +#define  PCIE_MISC_UBUS_BAR1_CONFIG_REMAP_ACCESS_EN_MASK	0x1

could you use BIT(0)

~Stan