[PATCH v2 4/8] dt-bindings: iio: dfsdm: move to backend framework

[Olivier MOYSAN]

Hi Rob,

On 6/28/24 23:35, Rob Herring wrote:
> On Tue, Jun 25, 2024 at 05:07:12PM +0200, Olivier Moysan wrote:
>> Change the DFSDM binding to use the new IIO backend framework,
>> along with the adoption of IIO generic channels.
>> This binding change allows to add scaling support to the DFSDM.
>>
>> Keep the legacy binding as deprecated for backward compatibility.
>>
>> The io-backends property is supported only in generic IIO channel
>> binding.
>>
>> - Channel description with the generic binding (Audio and Analog):
>>
>>    Properties superseded by generic properties:
>>      st,adc-channels: becomes "reg" property in channel node
>>      st,adc-channel-names: becomes "label" property in channel node
>>    Properties moved to channel child node:
>>      st,adc-channel-types: becomes st,adc-channel-type
>>      st,adc-channel-clk-src, st,adc-alt-channel
>>
>> - Analog binding:
>>
>>    DFSDM filter channel is configured as an IIO backend consumer.
>>    Add io-backends property in channel child nodes.
>>
>>    DFSDM is no more configured as a channel consumer from SD modulator.
>>    Use of io-channels in DFSDM node is deprecated.
>>
>> - Audio binding:
>>
>>    DFSDM audio DAI is configured as a channel consumer from DFSDM filter.
>>    No change compare to legacy.
>>
>> Signed-off-by: Olivier Moysan <olivier.moysan at foss.st.com>
>> ---
>>   .../bindings/iio/adc/st,stm32-dfsdm-adc.yaml  | 157 +++++++++++++++++-
>>   1 file changed, 151 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
>> index c1b1324fa132..1802120b16b0 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
>> +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
>> @@ -102,9 +102,11 @@ patternProperties:
>>           items:
>>             minimum: 0
>>             maximum: 7
>> +        deprecated: true
>>   
>>         st,adc-channel-names:
>>           description: List of single-ended channel names.
>> +        deprecated: true
>>   
>>         st,filter-order:
>>           description: |
>> @@ -118,6 +120,12 @@ patternProperties:
>>         "#io-channel-cells":
>>           const: 1
>>   
>> +      '#address-cells':
>> +        const: 1
>> +
>> +      '#size-cells':
>> +        const: 0
>> +
>>         st,adc-channel-types:
>>           description: |
>>             Single-ended channel input type.
>> @@ -128,6 +136,7 @@ patternProperties:
>>           items:
>>             enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
>>           $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> +        deprecated: true
>>   
>>         st,adc-channel-clk-src:
>>           description: |
>> @@ -139,6 +148,7 @@ patternProperties:
>>           items:
>>             enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
>>           $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>> +        deprecated: true
>>   
>>         st,adc-alt-channel:
>>           description:
>> @@ -147,6 +157,7 @@ patternProperties:
>>             If not set, channel n is connected to SPI input n.
>>             If set, channel n is connected to SPI input n + 1.
>>           type: boolean
>> +        deprecated: true
>>   
>>         st,filter0-sync:
>>           description:
>> @@ -165,11 +176,64 @@ patternProperties:
>>         - compatible
>>         - reg
>>         - interrupts
>> -      - st,adc-channels
>> -      - st,adc-channel-names
>>         - st,filter-order
>>         - "#io-channel-cells"
>>   
>> +    patternProperties:
>> +      "^channel@([0-9]|1[0-9])$":
> 
> Unit-addresses are normally hex. And according to reg below, the max
> value is 8.
> 

Right. The maximum number of serial interfaces is 8.
So, the pattern can be reduced to "^channel@([0-7])$":

>> +        type: object
>> +        $ref: adc.yaml
>> +        description: Represents the external channels which are connected to the DFSDM.
>> +
>> +        properties:
>> +          reg:
>> +            items:
>> +              minimum: 0
>> +              maximum: 8
> 
> More than 1 reg entry valid? Either way, you need maxItems. Or you can
> just drop 'items'
> 

Added "maxItems: 1" and dropped items.

>> +
>> +          label:
>> +            description:
>> +              Unique name to identify which channel this is.
>> +
>> +          st,adc-channel-type:
>> +            description: |
>> +              Single-ended channel input type.
>> +              - "SPI_R": SPI with data on rising edge (default)
>> +              - "SPI_F": SPI with data on falling edge
>> +              - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
>> +              - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
>> +            items:
> 
> 'items' is for arrays, but...
> 

Removed items

>> +              enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
>> +            $ref: /schemas/types.yaml#/definitions/string
> 
> not an array.
> 
>> +
>> +          st,adc-channel-clk-src:
>> +            description: |
>> +              Conversion clock source.
>> +              - "CLKIN": external SPI clock (CLKIN x)
>> +              - "CLKOUT": internal SPI clock (CLKOUT) (default)
>> +              - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
>> +              - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
>> +            items:
> 
> ditto
> 

Done

>> +              enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
>> +            $ref: /schemas/types.yaml#/definitions/string
>> +
>> +          st,adc-alt-channel:
>> +            description:
>> +              Must be defined if two sigma delta modulators are
>> +              connected on same SPI input.
>> +              If not set, channel n is connected to SPI input n.
>> +              If set, channel n is connected to SPI input n + 1.
>> +            type: boolean
>> +
>> +          io-backends:
>> +            description:
>> +              Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel.
> 
> How many entries (maxItems)?
> 
>> +
>> +        required:
>> +          - reg
>> +
>> +        additionalProperties: false
> 
> Put this next to the $ref for the node. And switch to
> unevaluatedProperties and drop 'label' from here.
> 

Done

>> +
>>       allOf:
>>         - if:
>>             properties:
>> @@ -199,9 +263,19 @@ patternProperties:
>>                 description:
>>                   From common IIO binding. Used to pipe external sigma delta
>>                   modulator or internal ADC output to DFSDM channel.
>> +              deprecated: true
>>   
>> -          required:
>> -            - io-channels
>> +          if:
>> +            required:
>> +              - st,adc-channels
>> +          then:
>> +            required:
>> +              - io-channels
>> +
>> +          patternProperties:
>> +            "^channel@([0-9]|1[0-9])$":
>> +              required:
>> +                - io-backends
> 
> Don't think this is needed here. If channel node is present, the
> io-backends should always be required, right? Then this can go under the
> node schema.
> 

The io-backends property is required only when we use st,stm32-dfsdm-adc 
compatible. In other words, when we are in an analog use case. In this 
case the channel is a consumer of a backend (typically a sd modulator)
In an audio use case (compatible st,stm32-dfsdm-dmic) the backend is not 
required.

BRs
Olivier

> Rob
> 
>