[PATCH RESEND v2 0/9] Merge arm64/riscv hugetlbfs contpte support
Alexandre Ghiti
alex at ghiti.fr
Tue Jul 2 00:51:27 PDT 2024
Hi Ryan,
On 24/06/2024 10:00, Ryan Roberts wrote:
> On 28/05/2024 09:07, Alexandre Ghiti wrote:
>> Hi Ryan,
>>
>> On 12/05/2024 19:25, Alexandre Ghiti wrote:
>>> Hi Ryan,
>>>
>>> On Fri, May 10, 2024 at 3:49 PM Ryan Roberts <ryan.roberts at arm.com> wrote:
>>>> On 08/05/2024 12:34, Alexandre Ghiti wrote:
>>>>> This patchset intends to merge the contiguous ptes hugetlbfs implementation
>>>>> of arm64 and riscv.
>>>>>
>>>>> Both arm64 and riscv support the use of contiguous ptes to map pages that
>>>>> are larger than the default page table size, respectively called contpte
>>>>> and svnapot.
>>>>>
>>>>> The riscv implementation differs from the arm64's in that the LSBs of the
>>>>> pfn of a svnapot pte are used to store the size of the mapping, allowing
>>>>> for future sizes to be added (for now only 64KB is supported). That's an
>>>>> issue for the core mm code which expects to find the *real* pfn a pte points
>>>>> to. Patch 1 fixes that by always returning svnapot ptes with the real pfn
>>>>> and restores the size of the mapping when it is written to a page table.
>>>>>
>>>>> The following patches are just merges of the 2 different implementations
>>>>> that currently exist in arm64 and riscv which are very similar. It paves
>>>>> the way to the reuse of the recent contpte THP work by Ryan [1] to avoid
>>>>> reimplementing the same in riscv.
>>>> Hi Alexandre,
>>>>
>>>> I've skimmed through this series and the one that moves contpte. I can see there
>>>> is definitely value in sharing the implementation, and the rough shape of things
>>>> seems appropriate. I had some minor concerns about making it harder to implement
>>>> potential future arm64 errata workarounds but on reflection, most of the
>>>> now-shared code is really just wrapping the primitives that are still
>>>> arch-specific.
>>>>
>>>> I'm going to need to spend proper time reviewing it to give detailed feedback,
>>>> but I'll be out on paternity leave for 3 weeks from end of Monday at the latest.
>>> Too bad, I expected to discuss that with you at LSF/MM...But congrats!
>>> Hope your wife is fine :)
>>>
>>>> So realistically I won't be able to do the detailed review until at least the
>>>> first week of June.
> Hi Alexandre,
>
> Sorry for the radio silence. I'm back at work now and have some cycles to review
> this. Did you ever post a new version based on the suggestions below?
Unfortunately no, other things happened that took all my attention, sorry.
>>>> Some high level thoughts:
>>>>
>>>> - huge_ptep_* functions could be working on different sized huge ptes - arm64
>>>> supports contpte, pmd, contpmd and pud. Is keeping them in contpte.c
>>>> appropriate?
>>> Hmm indeed, I'll see what I can do.
>>
>> So I took a look at that. It amounts to doing the same as what we do for THP
>> contptes, ie having both contpte-aware and "normal" APIs. Let's take for example
>> huge_ptep_get(), below is what I get. To me it's not that bad, so I'll implement
>> this unless there is strong opposition.
> I'm not sure I've understood what you are going here... see below.
>
>>
>> diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
>> index f8efbc128446..869a9aae6c68 100644
>> --- a/arch/arm64/include/asm/pgtable.h
>> +++ b/arch/arm64/include/asm/pgtable.h
>> @@ -1715,6 +1715,16 @@ static inline void clear_young_dirty_ptes(struct
>> vm_area_struct *vma,
>> contpte_clear_young_dirty_ptes(vma, addr, ptep, nr, flags);
>> }
>>
>> +static inline pte_t huge_ptep_get(pte_t *ptep)
>> +{
>> + pte_t orig_pte = __ptep_get(ptep);
>> +
>> + if (!pte_present(orig_pte) || !pte_cont(orig_pte))
>> + return orig_pte;
>> +
>> + return contpte_huge_ptep_get(ptep);
> A "huge pte" is not the same as a "cont pte". A huge pte is an abstract thing,
> which maybe of a number of different sizes; on arm64 with 4K base pages, 64K,
> 2M, 32M, 1G are supported. The 64K size is implemented using the PTE_CONT bit at
> PTE level. 2M is a single PMD level block, 32M uses PMD_CONT at PMD level and 1G
> is 1 PUD block. So I'm not sure it makes sense to tie this up with "contpte_"
> functions?
>
>> +}
>> +
>> #else /* CONFIG_ARM64_CONTPTE */
>>
>> #define ptep_get __ptep_get
>> @@ -1736,6 +1746,8 @@ static inline void clear_young_dirty_ptes(struct
>> vm_area_struct *vma,
>> #define ptep_set_access_flags __ptep_set_access_flags
>> #define clear_young_dirty_ptes __clear_young_dirty_ptes
>>
>> +#define huge_ptep_get __ptep_get
> I don't quite understand the logic here. huge ptes are needed for hugetlb so
> their definition needs to be tied to that, not to ARM64_CONTPTE, which is an
> independent feature.
>
>> +
>> #endif /* CONFIG_ARM64_CONTPTE */
>>
>> #endif /* !__ASSEMBLY__ */
>> diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
>> index 3f09ac73cce3..aa0ee3f02226 100644
>> --- a/arch/arm64/mm/hugetlbpage.c
>> +++ b/arch/arm64/mm/hugetlbpage.c
>> @@ -127,28 +127,6 @@ static inline int num_contig_ptes(unsigned long size,
>> size_t *pgsize)
>> return contig_ptes;
>> }
>>
>> -pte_t huge_ptep_get(pte_t *ptep)
>> -{
>> - int ncontig, i;
>> - size_t pgsize;
>> - pte_t orig_pte = __ptep_get(ptep);
>> -
>> - if (!pte_present(orig_pte) || !pte_cont(orig_pte))
>> - return orig_pte;
>> -
>> - ncontig = num_contig_ptes(page_size(pte_page(orig_pte)), &pgsize);
>> - for (i = 0; i < ncontig; i++, ptep++) {
>> - pte_t pte = __ptep_get(ptep);
>> -
>> - if (pte_dirty(pte))
>> - orig_pte = pte_mkdirty(orig_pte);
>> -
>> - if (pte_young(pte))
>> - orig_pte = pte_mkyoung(orig_pte);
>> - }
>> - return orig_pte;
>> -}
>> -
>> /*
>> * Changing some bits of contiguous entries requires us to follow a
>> * Break-Before-Make approach, breaking the whole contiguous set
>> diff --git a/mm/contpte.c b/mm/contpte.c
>> new file mode 100644
>> index 000000000000..4e742cf00b6f
>> --- /dev/null
>> +++ b/mm/contpte.c
>> @@ -0,0 +1,17 @@
>> +pte_t contpte_huge_ptep_get(pte_t *ptep)
>> +{
>> + int ncontig, i;
>> + size_t pgsize;
>> +
>> + ncontig = num_contig_ptes(page_size(pte_page(orig_pte)), &pgsize);
>> + for (i = 0; i < ncontig; i++, ptep++) {
>> + pte_t pte = __ptep_get(ptep);
>> +
>> + if (pte_dirty(pte))
>> + orig_pte = pte_mkdirty(orig_pte);
>> +
>> + if (pte_young(pte))
>> + orig_pte = pte_mkyoung(orig_pte);
>> + }
>> + return orig_pte;
>> +}
> I guess your observation is that contpte_ and hugepte_ code looks similar so it
> shold be grouped? I think if we can get some actual reuse that might make sense,
> but as implemented, this function is completely separate from
> contpte_ptep_get(). I wonder if its simpler just to have contpte.c for contpte_
> and hugepte_.c for hugepte_ then they can be included in the build independently
> based on arch/core Kconfigs (e.g. CONFIG_HUGETLB_PAGE vs CONFIG_ARM64_CONTPTE).
Yes, you're right, this was just rambling :)
>
>>>> Perhaps it's better to keep huge_pte and contpte separate? Also, it
>>>> only works on arm64 because we can get away with calling the lower-level pte
>>>> functions even when the huge_pte is actually a contpmd/pmd/pud, because the
>>>> format is the same. That might present challenges to other arches if the format
>>>> is different?
>>> Yes, but I think that if that happens, we could get away with it by
>>> choosing the right function depending on the size of the mapping?
>>>
>>>> - It might be easier to review if the arm64 stuff is first moved (without
>>>> changes) then modified to make it suitable for riscv, then for riscv to be
>>>> hooked up. At the moment I'm trying to follow all 3 parts per-function.
>>> Ok, let me give it a try during your paternity leave!
> Review would certainly be easier with this approach!
I'll do my best to do that soon.
Hope everything went well for you.
Thanks,
Alex
>
> Thanks,
> Ryan
>
>>>> Thanks,
>>>> Ryan
>>> Thanks,
>>>
>>> Alex
>>>
>>>>> This patchset was tested by running the libhugetlbfs testsuite with 64KB
>>>>> and 2MB pages on both architectures (on a 4KB base page size arm64 kernel).
>>>>>
>>>>> [1]
>>>>> https://lore.kernel.org/linux-arm-kernel/20240215103205.2607016-1-ryan.roberts@arm.com/
>>>>>
>>>>> Changes in v2:
>>>>> - Rebase on top of 6.9-rc3
>>>>>
>>>>> Alexandre Ghiti (9):
>>>>> riscv: Restore the pfn in a NAPOT pte when manipulated by core mm code
>>>>> riscv: Safely remove huge_pte_offset() when manipulating NAPOT ptes
>>>>> mm: Use common huge_ptep_get() function for riscv/arm64
>>>>> mm: Use common set_huge_pte_at() function for riscv/arm64
>>>>> mm: Use common huge_pte_clear() function for riscv/arm64
>>>>> mm: Use common huge_ptep_get_and_clear() function for riscv/arm64
>>>>> mm: Use common huge_ptep_set_access_flags() function for riscv/arm64
>>>>> mm: Use common huge_ptep_set_wrprotect() function for riscv/arm64
>>>>> mm: Use common huge_ptep_clear_flush() function for riscv/arm64
>>>>>
>>>>> arch/arm64/Kconfig | 1 +
>>>>> arch/arm64/include/asm/pgtable.h | 56 +++++-
>>>>> arch/arm64/mm/hugetlbpage.c | 291 +---------------------------
>>>>> arch/riscv/Kconfig | 1 +
>>>>> arch/riscv/include/asm/hugetlb.h | 2 +-
>>>>> arch/riscv/include/asm/pgtable-64.h | 11 ++
>>>>> arch/riscv/include/asm/pgtable.h | 153 +++++++++++++--
>>>>> arch/riscv/mm/hugetlbpage.c | 227 ----------------------
>>>>> arch/riscv/mm/pgtable.c | 6 +-
>>>>> mm/Kconfig | 3 +
>>>>> mm/Makefile | 1 +
>>>>> mm/contpte.c | 272 ++++++++++++++++++++++++++
>>>>> 12 files changed, 480 insertions(+), 544 deletions(-)
>>>>> create mode 100644 mm/contpte.c
>>>>>
>>> _______________________________________________
>>> linux-riscv mailing list
>>> linux-riscv at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-arm-kernel
mailing list