[PATCH 20/25] irqchip/armada-370-xp: Use consistent variable names for hwirqs
Marek Behún
kabel at kernel.org
Mon Jul 1 10:02:44 PDT 2024
Use consistent variable names for hwirqs: when iterating, use i,
otherwise use hwirq.
Signed-off-by: Marek Behún <kabel at kernel.org>
---
drivers/irqchip/irq-armada-370-xp.c | 52 ++++++++++++++---------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index f773d88ead73..b08f49516bee 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -117,7 +117,7 @@
#define MPIC_SW_TRIG_INT 0x04
#define MPIC_INT_SET_ENABLE 0x30
#define MPIC_INT_CLEAR_ENABLE 0x34
-#define MPIC_INT_SOURCE_CTL(irq) (0x100 + (irq) * 4)
+#define MPIC_INT_SOURCE_CTL(hwirq) (0x100 + (hwirq) * 4)
#define MPIC_INT_SOURCE_CPU_MASK GENMASK(3, 0)
#define MPIC_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << (cpuid))
@@ -199,9 +199,9 @@ static inline unsigned int msi_doorbell_end(void)
PCI_MSI_FULL_DOORBELL_END;
}
-static inline bool mpic_is_percpu_irq(irq_hw_number_t irq)
+static inline bool mpic_is_percpu_irq(irq_hw_number_t hwirq)
{
- return irq <= MPIC_MAX_PER_CPU_IRQS;
+ return hwirq <= MPIC_MAX_PER_CPU_IRQS;
}
/*
@@ -577,20 +577,20 @@ static struct irq_chip mpic_irq_chip = {
};
static int mpic_irq_map(struct irq_domain *h, unsigned int virq,
- irq_hw_number_t hw)
+ irq_hw_number_t hwirq)
{
/* IRQs 0 and 1 cannot be mapped, they are handled internally */
- if (hw <= 1)
+ if (hwirq <= 1)
return -EINVAL;
mpic_irq_mask(irq_get_irq_data(virq));
- if (!mpic_is_percpu_irq(hw))
- writel(hw, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
+ if (!mpic_is_percpu_irq(hwirq))
+ writel(hwirq, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
else
- writel(hw, main_int_base + MPIC_INT_SET_ENABLE);
+ writel(hwirq, main_int_base + MPIC_INT_SET_ENABLE);
irq_set_status_flags(virq, IRQ_LEVEL);
- if (mpic_is_percpu_irq(hw)) {
+ if (mpic_is_percpu_irq(hwirq)) {
irq_set_percpu_devid(virq);
irq_set_chip_and_handler(virq, &mpic_irq_chip,
handle_percpu_devid_irq);
@@ -629,15 +629,15 @@ static void mpic_handle_cascade_irq(struct irq_desc *desc)
{
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long irqmap, irqsrc, cpuid;
- irq_hw_number_t irqn;
+ irq_hw_number_t hwirq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + MPIC_PPI_CAUSE);
cpuid = cpu_logical_map(smp_processor_id());
- for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
- irqsrc = readl_relaxed(main_int_base + MPIC_INT_SOURCE_CTL(irqn));
+ for_each_set_bit(hwirq, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base + MPIC_INT_SOURCE_CTL(hwirq));
/* Check if the interrupt is not masked on current CPU.
* Test IRQ (0-1) and FIQ (8-9) mask bits.
@@ -645,12 +645,12 @@ static void mpic_handle_cascade_irq(struct irq_desc *desc)
if (!(irqsrc & MPIC_INT_IRQ_FIQ_MASK(cpuid)))
continue;
- if (irqn == 0 || irqn == 1) {
+ if (hwirq == 0 || hwirq == 1) {
mpic_handle_msi_irq(NULL, true);
continue;
}
- generic_handle_domain_irq(mpic_domain, irqn);
+ generic_handle_domain_irq(mpic_domain, hwirq);
}
chained_irq_exit(chip, desc);
@@ -658,28 +658,28 @@ static void mpic_handle_cascade_irq(struct irq_desc *desc)
static void __exception_irq_entry mpic_handle_irq(struct pt_regs *regs)
{
- irq_hw_number_t irqnr;
+ irq_hw_number_t hwirq;
u32 irqstat;
do {
irqstat = readl_relaxed(per_cpu_int_base + MPIC_CPU_INTACK);
- irqnr = FIELD_GET(MPIC_CPU_INTACK_IID_MASK, irqstat);
+ hwirq = FIELD_GET(MPIC_CPU_INTACK_IID_MASK, irqstat);
- if (irqnr > 1022)
+ if (hwirq > 1022)
break;
- if (irqnr > 1) {
- generic_handle_domain_irq(mpic_domain, irqnr);
+ if (hwirq > 1) {
+ generic_handle_domain_irq(mpic_domain, hwirq);
continue;
}
/* MSI handling */
- if (irqnr == 1)
+ if (hwirq == 1)
mpic_handle_msi_irq(regs, false);
#ifdef CONFIG_SMP
/* IPI Handling */
- if (irqnr == 0) {
+ if (hwirq == 0) {
unsigned long ipimask;
irq_hw_number_t ipi;
@@ -706,24 +706,24 @@ static void mpic_resume(void)
bool src0, src1;
/* Re-enable interrupts */
- for (irq_hw_number_t irq = 0; irq < mpic_domain->hwirq_max; irq++) {
+ for (irq_hw_number_t i = 0; i < mpic_domain->hwirq_max; i++) {
struct irq_data *data;
int virq;
- virq = irq_linear_revmap(mpic_domain, irq);
+ virq = irq_linear_revmap(mpic_domain, i);
if (!virq)
continue;
data = irq_get_irq_data(virq);
- if (!mpic_is_percpu_irq(irq)) {
+ if (!mpic_is_percpu_irq(i)) {
/* Non per-CPU interrupts */
- writel(irq, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
+ writel(i, per_cpu_int_base + MPIC_INT_CLEAR_MASK);
if (!irqd_irq_disabled(data))
mpic_irq_unmask(data);
} else {
/* Per-CPU interrupts */
- writel(irq, main_int_base + MPIC_INT_SET_ENABLE);
+ writel(i, main_int_base + MPIC_INT_SET_ENABLE);
/*
* Re-enable on the current CPU, mpic_reenable_percpu()
--
2.44.2
More information about the linux-arm-kernel
mailing list