[PATCH] ARM: dts: microchip: at91: align LED node name with bindings
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Mon Jul 1 09:49:52 PDT 2024
Bindings expect the LED node names to follow certain pattern, see
dtbs_check warnings:
at91sam9g15ek.dtb: leds: 'pb18', 'pd21' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
.../boot/dts/microchip/at91sam9g20ek_2mmc.dts | 4 ++--
.../at91sam9g25-gardena-smart-gateway.dts | 24 +++++++++----------
arch/arm/boot/dts/microchip/at91sam9n12ek.dts | 6 ++---
arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi | 4 ++--
4 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
index 172af6ff4b18..3e5eab57d1a5 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g20ek_2mmc.dts
@@ -40,13 +40,13 @@ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
leds {
compatible = "gpio-leds";
- ds1 {
+ led-ds1 {
label = "ds1";
gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- ds5 {
+ led-ds5 {
label = "ds5";
gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index af70eb8a3a02..e0c1e8df81b1 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -37,71 +37,71 @@ button {
leds {
compatible = "gpio-leds";
- power_blue {
+ led-power-blue {
label = "smartgw:power:blue";
gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- power_green {
+ led-power-green {
label = "smartgw:power:green";
gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- power_red {
+ led-power-red {
label = "smartgw:power:red";
gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_blue {
+ led-radio-blue {
label = "smartgw:radio:blue";
gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_green {
+ led-radio-green {
label = "smartgw:radio:green";
gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- radio_red {
+ led-radio-red {
label = "smartgw:radio:red";
gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_blue {
+ led-internet-blue {
label = "smartgw:internet:blue";
gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_green {
+ led-internet-green {
label = "smartgw:internet:green";
gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- internet_red {
+ led-internet-red {
label = "smartgw:internet:red";
gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- heartbeat {
+ led-heartbeat {
label = "smartgw:heartbeat";
gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- pb18 {
+ led-pb18 {
status = "disabled";
};
- pd21 {
+ led-pd21 {
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
index 4c644d4c6be7..643c3b2ab97e 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9n12ek.dts
@@ -207,19 +207,19 @@ bl_reg: backlight_regulator {
leds {
compatible = "gpio-leds";
- d8 {
+ led-d8 {
label = "d8";
gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "mmc0";
};
- d9 {
+ led-d9 {
label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
- d10 {
+ led-d10 {
label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
index cdd37f67280b..fb3c19bdfcb6 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5cm.dtsi
@@ -120,13 +120,13 @@ rootfs at 800000 {
leds {
compatible = "gpio-leds";
- pb18 {
+ led-pb18 {
label = "pb18";
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
- pd21 {
+ led-pd21 {
label = "pd21";
gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
};
--
2.43.0
More information about the linux-arm-kernel
mailing list