[PATCH 3/7] arm64: dts: imx95-19x19-evk: Add audio related nodes

[Frank Li]

On Fri, Jun 28, 2024 at 12:03:27AM +0000, Peng Fan wrote:
> > Subject: [PATCH 3/7] arm64: dts: imx95-19x19-evk: Add audio related
> > nodes
> > 
> > Add sai1, sai2. Add i2c4 and wm8962 and other dependent nodes.
> > 
> > Signed-off-by: Frank Li <Frank.Li at nxp.com>
> > ---
> >  .../boot/dts/freescale/imx95-19x19-evk.dts    | 238
> > ++++++++++++++++++
> >  1 file changed, 238 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > index d14a54ab4fd47..660e623f4f964 100644
> > --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > @@ -17,6 +17,11 @@ aliases {
> >  		serial0 = &lpuart1;
> >  	};
> > 
...
> > +			     0x0000 /* 4:FN_DMICCDAT */
> > +			     0x0000 /* 5:Default */
> > +			   >;
> > +	};
> > +
> > +	i2c4_gpio_expander_21: gpio at 21 {
> 
> Use gpio-expander at 21?
> It is easy to duplicate the node if other i2c bus also
> has one.

It should be fine, parent node is difference. gpio-expander at 21 can't
resolve your problem. 

i2c2
{
	gpio-expander at 21 {};
}

i2c3
{
	gpio-expander at 21 {};
}

It should be same situation as gpio at 21.

DT should allow the same name under difference parent.

Frank

> 
> Regards,
> Peng.
>