[PATCH v2 0/2] nxp: imx: Add support for Apalis Evaluation Board v1.2

[Hiago De Franco]

From: Hiago De Franco <hiago.franco at toradex.com>

This patch series introduces support for the new Apalis Evaluation Board
v1.2. With the introduction of v1.2, a common dtsi file, containing
shared configurations for both apalis-eval.dts and apalis-eval-v1.2.dts,
has been created. The eval and eval-v1.2 dts files will now capture the
differences between these two boards. Additionally, updates have been
made to nxp/imx/Makefile and arm/fsl.yaml to accommodate these changes.

v1:
  - https://lore.kernel.org/all/20240122123526.43400-1-hiagofranco@gmail.com/

v2:
  - Add missing off-on-delay-us property with 100ms to reg_3v3_mmc and
  reg_3v3_sd.
  - Fix startup-delay-us property from 100us (reg_3v3_mmc and reg_3v3_sd)
  and 1ms (reg_can1 and reg_can2) to 10ms.
  - Fix pinctrl mux from 0xb000 to 0x1b0b0.
  - Add Acked-by: Conor Dooley.
  - Add Reviewed-by: Francesco Dolcini.

Hiago De Franco (2):
  dt-bindings: arm: fsl: Add toradex,apalis_imx6q-eval-v1.2 board
  arm: dts: nxp: imx: Add support for Apalis Evaluation Board v1.2

 .../devicetree/bindings/arm/fsl.yaml          |   3 +-
 arch/arm/boot/dts/nxp/imx/Makefile            |   1 +
 .../dts/nxp/imx/imx6q-apalis-eval-v1.2.dts    | 200 ++++++++++++++++++
 .../boot/dts/nxp/imx/imx6q-apalis-eval.dts    | 108 +---------
 .../boot/dts/nxp/imx/imx6q-apalis-eval.dtsi   | 120 +++++++++++
 5 files changed, 325 insertions(+), 107 deletions(-)
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval-v1.2.dts
 create mode 100644 arch/arm/boot/dts/nxp/imx/imx6q-apalis-eval.dtsi

-- 
2.43.0