[PATCH 3/8] net: stmmac: Introduce Qualcomm IPQ50xx DWMAC driver

Ziyang Huang hzyitc at outlook.com
Sun Jan 21 04:42:32 PST 2024


Signed-off-by: Ziyang Huang <hzyitc at outlook.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   7 +
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-ipq50xx.c   | 155 ++++++++++++++++++
 3 files changed, 163 insertions(+)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq50xx.c

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 06c6871f8788..baf6601d759c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -78,6 +78,13 @@ config DWMAC_INGENIC
 	  device driver. This driver is used on for the Ingenic SoCs
 	  MAC ethernet controller.
 
+config DWMAC_IPQ50XX
+	tristate "Qualcomm IPQ50xx DWMAC driver"
+	default ARCH_QCOM
+	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	help
+	  Support for the Qualcomm IPQ50xx DWMAC.
+
 config DWMAC_IPQ806X
 	tristate "QCA IPQ806x DWMAC support"
 	default ARCH_QCOM
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 5b57aee19267..eec4405d76d2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -15,6 +15,7 @@ stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
 obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-platform.o
 obj-$(CONFIG_DWMAC_ANARION)	+= dwmac-anarion.o
 obj-$(CONFIG_DWMAC_INGENIC)	+= dwmac-ingenic.o
+obj-$(CONFIG_DWMAC_IPQ50XX)	+= dwmac-ipq50xx.o
 obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
 obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
 obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq50xx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq50xx.c
new file mode 100644
index 000000000000..de8e9a0b2cb6
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq50xx.c
@@ -0,0 +1,155 @@
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+enum {
+	IPQ50XX_GMAC_CLK_SYS,
+	IPQ50XX_GMAC_CLK_CFG,
+	IPQ50XX_GMAC_CLK_AHB,
+	IPQ50XX_GMAC_CLK_AXI,
+	IPQ50XX_GMAC_CLK_RX,
+	IPQ50XX_GMAC_CLK_TX,
+	IPQ50XX_GMAC_CLK_PTP,
+};
+
+static const struct clk_bulk_data ipq50xx_gmac_clks[] = {
+	[IPQ50XX_GMAC_CLK_SYS]	= { .id = "sys" },
+	[IPQ50XX_GMAC_CLK_CFG]	= { .id = "cfg" },
+	[IPQ50XX_GMAC_CLK_AHB]	= { .id = "ahb" },
+	[IPQ50XX_GMAC_CLK_AXI]	= { .id = "axi" },
+	[IPQ50XX_GMAC_CLK_RX]	= { .id = "rx" },
+	[IPQ50XX_GMAC_CLK_TX]	= { .id = "tx" },
+	[IPQ50XX_GMAC_CLK_PTP]	= { .id = "ptp" },
+};
+
+struct ipq50xx_gmac {
+	struct device *dev;
+	struct clk_bulk_data clks[ARRAY_SIZE(ipq50xx_gmac_clks)];
+	struct reset_control *rst;
+	struct phy *uniphy;
+};
+
+static int ipq50xx_gmac_powerup(struct net_device *ndev, void *priv)
+{
+	struct ipq50xx_gmac *gmac = priv;
+	int ret;
+
+	ret = phy_init(gmac->uniphy);
+	if (ret)
+		return ret;
+
+	ret = phy_power_on(gmac->uniphy);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void ipq50xx_gmac_fix_speed(void *priv, unsigned int speed, unsigned int mode)
+{
+	struct ipq50xx_gmac *gmac = priv;
+	unsigned long rate;
+
+	switch(speed) {
+		case SPEED_10:
+			rate = 2500000;
+			break;
+		case SPEED_100:
+			rate = 25000000;
+			break;
+		case SPEED_1000:
+			rate = 125000000;
+			break;
+		case SPEED_2500:
+			rate = 312500000;
+			break;
+		default:
+			dev_err(gmac->dev, "Unsupported speed: %d\n", speed);
+			rate = 125000000;
+			break;
+	}
+
+	clk_set_rate(gmac->clks[IPQ50XX_GMAC_CLK_RX].clk, rate);
+	clk_set_rate(gmac->clks[IPQ50XX_GMAC_CLK_TX].clk, rate);
+	phy_calibrate(gmac->uniphy);
+}
+
+static int ipq50xx_gmac_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct stmmac_resources stmmac_res;
+	struct plat_stmmacenet_data *plat_dat;
+	struct ipq50xx_gmac *gmac;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to get stmmac platform resources\n");
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR_OR_NULL(plat_dat))
+		return dev_err_probe(dev, PTR_ERR(plat_dat),
+				     "failed to parse stmmac dt parameters\n");
+
+	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
+	if (!gmac)
+		return dev_err_probe(dev, -ENOMEM,
+				     "failed to allocate priv\n");
+
+	gmac->dev = dev;
+
+	memcpy(gmac->clks, ipq50xx_gmac_clks, sizeof(gmac->clks));
+	ret = devm_clk_bulk_get_optional(dev, ARRAY_SIZE(gmac->clks), gmac->clks);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to acquire clocks\n");
+
+	ret = clk_bulk_prepare_enable(ARRAY_SIZE(gmac->clks), gmac->clks);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to enable clocks\n");
+
+	gmac->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR_OR_NULL(gmac->rst))
+		return dev_err_probe(dev, PTR_ERR(gmac->rst),
+				     "failed to acquire reset\n");
+
+	ret = reset_control_reset(gmac->rst);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to reset\n");
+
+	gmac->uniphy = devm_phy_optional_get(dev, "uniphy");
+	if (IS_ERR(gmac->uniphy))
+		return dev_err_probe(dev, PTR_ERR(gmac->uniphy),
+				     "failed to acquire uniphy\n");
+
+	plat_dat->bsp_priv = gmac;
+	plat_dat->serdes_powerup = ipq50xx_gmac_powerup;
+	plat_dat->fix_mac_speed = ipq50xx_gmac_fix_speed;
+
+	return stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
+}
+
+static const struct of_device_id ipq50xx_gmac_dwmac_match[] = {
+	{ .compatible = "qcom,ipq50xx-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq50xx_gmac_dwmac_match);
+
+static struct platform_driver ipq50xx_gmac_dwmac_driver = {
+	.probe = ipq50xx_gmac_probe,
+	.driver = {
+		.name		= "ipq50xx-gmac-dwmac",
+		.of_match_table	= ipq50xx_gmac_dwmac_match,
+	},
+};
+module_platform_driver(ipq50xx_gmac_dwmac_driver);
+
+MODULE_DESCRIPTION("Qualcomm IPQ50xx DWMAC driver");
+MODULE_AUTHOR("Ziyang Huang <hzyitc at outlook.com>");
-- 
2.40.1




More information about the linux-arm-kernel mailing list