[PATCH 2/2] pinctrl: mediatek: mt7981: add additional emmc groups

Daniel Golle daniel at makrotopia.org
Wed Jan 17 06:08:56 PST 2024



On 17 January 2024 12:42:34 UTC, Jean Thomas <jean.thomas at wifirst.fr> wrote:
>Add new emmc groups in the pinctrl driver for the
>MediaTek MT7981 SoC:
>* emmc reset, with pin 15.
>* emmc 4-bit bus-width, with pins 16 to 19, and 24 to 25.
>* emmc 8-bit bus-width, with pins 16 to 25.
>
>The existing emmc_45 group is kept for legacy reasons, even
>if this is the union of emmc_reset and emmc_8 groups.
>
>Signed-off-by: Jean Thomas <jean.thomas at wifirst.fr>

Reviewed-by: Daniel Golle <daniel at makrotopia.org>

>---
> drivers/pinctrl/mediatek/pinctrl-mt7981.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7981.c b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
>index ca667ed25a4d..ef6123765885 100644
>--- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c
>+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
>@@ -700,6 +700,15 @@ static int mt7981_drv_vbus_pins[] = { 14, };
> static int mt7981_drv_vbus_funcs[] = { 1, };
> 
> /* EMMC */
>+static int mt7981_emmc_reset_pins[] = { 15, };
>+static int mt7981_emmc_reset_funcs[] = { 2, };
>+
>+static int mt7981_emmc_4_pins[] = { 16, 17, 18, 19, 24, 25, };
>+static int mt7981_emmc_4_funcs[] = { 2, 2, 2, 2, 2, 2, };
>+
>+static int mt7981_emmc_8_pins[] = { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, };
>+static int mt7981_emmc_8_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
>+
> static int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, };
> static int mt7981_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
> 
>@@ -854,6 +863,12 @@ static const struct group_desc mt7981_groups[] = {
> 	PINCTRL_PIN_GROUP("udi", mt7981_udi),
> 	/* @GPIO(14) DRV_VBUS(1) */
> 	PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus),
>+	/* @GPIO(15): EMMC_RSTB(2) */
>+	PINCTRL_PIN_GROUP("emmc_reset", mt7981_emmc_reset),
>+	/* @GPIO(16,17,18,19,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */
>+	PINCTRL_PIN_GROUP("emmc_4", mt7981_emmc_4),
>+	/* @GPIO(16,17,18,19,20,21,22,23,24,25): EMMC_DATx, EMMC_CLK, EMMC_CMD */
>+	PINCTRL_PIN_GROUP("emmc_8", mt7981_emmc_8),
> 	/* @GPIO(15,25): EMMC(2) */
> 	PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45),
> 	/* @GPIO(16,21): SNFI(3) */
>@@ -957,7 +972,7 @@ static const char *mt7981_i2c_groups[] = { "i2c0_0", "i2c0_1", "u2_phy_i2c",
> static const char *mt7981_pcm_groups[] = { "pcm", };
> static const char *mt7981_udi_groups[] = { "udi", };
> static const char *mt7981_usb_groups[] = { "drv_vbus", };
>-static const char *mt7981_flash_groups[] = { "emmc_45", "snfi", };
>+static const char *mt7981_flash_groups[] = { "emmc_reset", "emmc_4", "emmc_8", "emmc_45", "snfi", };
> static const char *mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio",
> 	"wf0_mode1", "wf0_mode3", "mt7531_int", };
> static const char *mt7981_ant_groups[] = { "ant_sel", };



More information about the linux-arm-kernel mailing list