[PATCH v2 1/3] dt-bindings: display: convert Atmel's HLCDC to DT schema
Conor Dooley
conor at kernel.org
Tue Jan 16 09:55:43 PST 2024
Yo,
On Tue, Jan 16, 2024 at 05:07:58PM +0530, Dharma Balasubiramani wrote:
> Convert the existing DT binding to DT schema of the Atmel's HLCDC display
> controller.
>
> Signed-off-by: Dharma Balasubiramani <dharma.b at microchip.com>
> ---
> changelog
> v1 -> v2
> - Remove the explicit copyrights.
> - Modify filename like compatible.
> - Modify title (drop words like binding/driver).
> - Modify description actually describing the hardware and not the driver.
> - Remove pinctrl properties which aren't required.
> - Ref endpoint and not endpoint-base.
> - Drop redundant info about bus-width description and add ref to video-interfaces.
> - Move 'additionalProperties' after 'Required'.
> - Drop parent node and it's other sub-device node which are not related here.
> - Add compatible to example 2 and add comments that bus-width is the diff between two examples.
> ---
> .../atmel/atmel,hlcdc-display-controller.yaml | 110 ++++++++++++++++++
> .../bindings/display/atmel/hlcdc-dc.txt | 75 ------------
> 2 files changed, 110 insertions(+), 75 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
> delete mode 100644 Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
>
> diff --git a/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
> new file mode 100644
> index 000000000000..f022c294cfbc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel's High LCD Controller (HLCDC)
> +
> +maintainers:
> + - Nicolas Ferre <nicolas.ferre at microchip.com>
> + - Alexandre Belloni <alexandre.belloni at bootlin.com>
> + - Claudiu Beznea <claudiu.beznea at tuxon.dev>
> +
> +description: |
This | is not needed as you have no formatting to preserve.
> + The LCD Controller (LCDC) consists of logic for transferring LCD image
> + data from an external display buffer to a TFT LCD panel. The LCDC has one
> + display input buffer per layer that fetches pixels through the single bus
> + host interface and a look-up table to allow palletized display
> + configurations.
> +
> +properties:
> + compatible:
> + const: atmel,hlcdc-display-controller
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + port at 0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Output endpoint of the controller, connecting the LCD panel signals.
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + endpoint:
> + $ref: /schemas/graph.yaml#/$defs/endpoint
$ref: /schemas/media/video-interfaces.yaml#
to match approximately all other endpoints?
> + unevaluatedProperties: false
> + description:
> + Endpoint connecting the LCD panel signals.
> +
> + properties:
> + bus-width:
> + description: Endpoint bus width.
> + $ref: /schemas/media/video-interfaces.yaml#
and then bus-width's type is already defined for you, no?
> + enum: [ 12, 16, 18, 24 ]
> +
> +required:
> + - '#address-cells'
> + - '#size-cells'
> + - compatible
> + - port at 0
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + //Example 1
> +
> + display-controller {
> + compatible = "atmel,hlcdc-display-controller";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> +
> + hlcdc_panel_output: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + };
> + };
> + };
> +
> + - |
> + //Example 2 With a video interface override to force rgb565, bus-width=16
> +
> + display-controller {
> + compatible = "atmel,hlcdc-display-controller";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
Should be a newline here before the child node.
Cheers,
Conor.
> + hlcdc_panel_output2: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&panel_input>;
> + bus-width = <16>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> deleted file mode 100644
> index 923aea25344c..000000000000
> --- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
> -
> -The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
> -See ../../mfd/atmel-hlcdc.txt for more details.
> -
> -Required properties:
> - - compatible: value should be "atmel,hlcdc-display-controller"
> - - pinctrl-names: the pin control state names. Should contain "default".
> - - pinctrl-0: should contain the default pinctrl states.
> - - #address-cells: should be set to 1.
> - - #size-cells: should be set to 0.
> -
> -Required children nodes:
> - Children nodes are encoding available output ports and their connections
> - to external devices using the OF graph representation (see ../graph.txt).
> - At least one port node is required.
> -
> -Optional properties in grandchild nodes:
> - Any endpoint grandchild node may specify a desired video interface
> - according to ../../media/video-interfaces.txt, specifically
> - - bus-width: recognized values are <12>, <16>, <18> and <24>, and
> - override any output mode selection heuristic, forcing "rgb444",
> - "rgb565", "rgb666" and "rgb888" respectively.
> -
> -Example:
> -
> - hlcdc: hlcdc at f0030000 {
> - compatible = "atmel,sama5d3-hlcdc";
> - reg = <0xf0030000 0x2000>;
> - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> - clock-names = "periph_clk","sys_clk", "slow_clk";
> -
> - hlcdc-display-controller {
> - compatible = "atmel,hlcdc-display-controller";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port at 0 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0>;
> -
> - hlcdc_panel_output: endpoint at 0 {
> - reg = <0>;
> - remote-endpoint = <&panel_input>;
> - };
> - };
> - };
> -
> - hlcdc_pwm: hlcdc-pwm {
> - compatible = "atmel,hlcdc-pwm";
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd_pwm>;
> - #pwm-cells = <3>;
> - };
> - };
> -
> -Example 2: With a video interface override to force rgb565; as above
> -but with these changes/additions:
> -
> - &hlcdc {
> - hlcdc-display-controller {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> -
> - port at 0 {
> - hlcdc_panel_output: endpoint at 0 {
> - bus-width = <16>;
> - };
> - };
> - };
> - };
> --
> 2.25.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240116/14a3d2ca/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list