[PATCH 1/3] dt-bindings: soc: imx: add fdcc clock to i.MX8MP hdmi blk ctrl

[Krzysztof Kozlowski]

On 06/01/2024 23:39, Adam Ford wrote:
> Per guidance from the NXP downstream kernel, if the clock is
> disabled before HDMI/LCDIF probe, LCDIF will not get pixel
> clock from HDMI PHY and throw an error.  Fix this by adding
> the fdcc clock to the hdmi_blk_ctrl.
> 

Adding a required clock is ABI break and commit msg is not clear whether
this was actually necessary or how did it worked so far...

Best regards,
Krzysztof