[PATCH v5 10/10] arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure

Josua Mayer josua at solid-run.com
Thu Jan 4 09:48:11 PST 2024


Clearfog GTR has an official enclosure with labels for all interfaces.
The "lan" ports on the 8-port switch in device-tree were numbered  in
reverse wrt. enclosure.

Update all device-tree labels to match.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
index 2df388f222ec..da6981677b03 100644
--- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts
@@ -32,49 +32,49 @@ ports {
 
 			port at 1 {
 				reg = <1>;
-				label = "lan8";
+				label = "lan1";
 				phy-handle = <&switch0phy0>;
 			};
 
 			port at 2 {
 				reg = <2>;
-				label = "lan7";
+				label = "lan2";
 				phy-handle = <&switch0phy1>;
 			};
 
 			port at 3 {
 				reg = <3>;
-				label = "lan6";
+				label = "lan3";
 				phy-handle = <&switch0phy2>;
 			};
 
 			port at 4 {
 				reg = <4>;
-				label = "lan5";
+				label = "lan4";
 				phy-handle = <&switch0phy3>;
 			};
 
 			port at 5 {
 				reg = <5>;
-				label = "lan4";
+				label = "lan5";
 				phy-handle = <&switch0phy4>;
 			};
 
 			port at 6 {
 				reg = <6>;
-				label = "lan3";
+				label = "lan6";
 				phy-handle = <&switch0phy5>;
 			};
 
 			port at 7 {
 				reg = <7>;
-				label = "lan2";
+				label = "lan7";
 				phy-handle = <&switch0phy6>;
 			};
 
 			port at 8 {
 				reg = <8>;
-				label = "lan1";
+				label = "lan8";
 				phy-handle = <&switch0phy7>;
 			};
 

-- 
2.35.3




More information about the linux-arm-kernel mailing list