[PATCH v2 1/2] arm64: dts: imx8mp-evk: Add HDMI audio sound card support

[Alexander Stein]

Hi,

Am Dienstag, 27. Februar 2024, 08:03:25 CET schrieb Shengjiu Wang:
> The AUD2HTX is a digital module that provides a bridge between
> the Audio Subsystem and the HDMI RTX Subsystem. This
> module includes intermediate storage to queue SDMA transactions
> prior to being synchronized and passed to the HDMI
> RTX Subsystem over the Audio Link.
> 
> AUD2HTX works as the cpu dai in HDMI audio sound card.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
> 
> changes in v2:
> - remove 'status' in sound-hdmi
> 
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 11 +++++++++++
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi    | 10 ++++++++++

Maybe split this patch into two:
* adding aud2htx node
* enabling board support

>  2 files changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index f87fa5a948cc..0fc6c0d21cd6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -138,6 +138,13 @@ simple-audio-card,codec {
>  
>  	};
>  
> +	sound-hdmi {
> +		compatible = "fsl,imx-audio-hdmi";
> +		model = "audio-hdmi";
> +		audio-cpu = <&aud2htx>;
> +		hdmi-out;
> +	};
> +
>  	reserved-memory {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -191,6 +198,10 @@ &A53_3 {
>  	cpu-supply = <&reg_arm>;
>  };
>  
> +&aud2htx {
> +	status = "okay";
> +};
> +
>  &eqos {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_eqos>;

This part looks good:
Acked-by: Alexander Stein <alexander.stein at ew.tq-group.com>

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 9ab9c057f41e..721ab630d895 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1513,6 +1513,16 @@ micfil: audio-controller at 30ca0000 {
>  					status = "disabled";
>  				};
>  
> +				aud2htx: aud2htx at 30cb0000 {
> +					compatible = "fsl,imx8mp-aud2htx";
> +					reg = <0x30cb0000 0x10000>;
> +					interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> +					clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
> +					clock-names = "bus";
> +					dmas = <&sdma2 26 2 0>;
> +					dma-names = "tx";
> +					status = "disabled";
> +				};

My WIP has the same node:
Reviewed-by: Alexander Stein <alexander.stein at ew.tq-group.com>

>  			};
>  
>  			sdma3: dma-controller at 30e00000 {
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/