[PATCH v6 0/4] arm64: dts: ti: am62: Add USB support for k3-am62p

Roger Quadros rogerq at kernel.org
Mon Feb 26 04:03:06 PST 2024


Hi,

This series first adds device nodes for USB0_PHY_CTRL and USB1_PHY_CTRL
in the wkup_conf node and fixus up the USB nodes to use the newly
added nodes.

Then it adds USB support for AM62P SoC and AM62P5-SK board.

cheers,
-roger

Signed-off-by: Roger Quadros <rogerq at kernel.org>
---
Changes in v6:
- Rebased on next-20240226
- Link to v5: https://lore.kernel.org/r/20240223-b4-for-v6-5-am62-usb-typec-dt-v5-0-4b5854d17d18@kernel.org

---
Roger Quadros (4):
      dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
      arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers
      arm64: dts: ti: k3-am62p: add the USB sub-system
      arm64: dts: ti: k3-am62a: Disable USB LPM

 Documentation/devicetree/bindings/mfd/syscon.yaml |  1 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi          |  4 +-
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi        | 10 ++++
 arch/arm64/boot/dts/ti/k3-am62a-main.dtsi         |  8 ++-
 arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi       | 10 ++++
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi         | 50 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi       | 10 ++++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts           | 67 +++++++++++++++++++++++
 8 files changed, 156 insertions(+), 4 deletions(-)
---
base-commit: 8552c902efe7ef670b6961fb8885b67961aeb629
change-id: 20240223-b4-for-v6-5-am62-usb-typec-dt-769eec4c8c4a

Best regards,
-- 
Roger Quadros <rogerq at kernel.org>




More information about the linux-arm-kernel mailing list