[PATCH v5 0/5] arm64: dts: add description for solidrun am642 som and hummingboard evb

Andrew Davis afd at ti.com
Mon Feb 12 08:58:58 PST 2024


On 2/12/24 10:39 AM, Josua Mayer wrote:
> Hi Vignesh,
> 
> Am 12.02.24 um 05:10 schrieb Vignesh Raghavendra:
>> Hi Josua,
>>
>> On 11/02/24 20:37, Josua Mayer wrote:
>>> This series adds DT bindings and dts descriptions for SolidRun AM642
>>> based SoM and Hummingboard EVB.
>>>
>>> Additionally a commit from downstream vendor kernel are included,
>>> enhancing support for pru based ethernet.
>>> I wasn't sure how to properly annotate it in commit description /
>>> signed-off area ...:
>>>
>>> 1. add description for "Industrial Ethernet Peripherals" (IEP) to am64
>>>     https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6
>>>     IEP is already supported in-tree by a driver, and used in
>>>     k3-am65-main.dtsi.
>>>
>>> Unfortunately dtbs_check reported many problems, I put some remarks:
>>>
>>> - 'mux-controller' does not match any of the regexes
>>>    The expectation seems to be that a mux-controller at minimum has an
>>>    address, something to put behind an @. However this is a gpio mux, not
>>>    sure how to name it better.
>>>
>> I don't see this warning locally. Are you using updated dt-schema?
> pip3 install dtschema --upgrade
> Defaulting to user installation because normal site-packages is not writeable
> Requirement already satisfied: dtschema in ~/.local/lib/python3.11/site-packages (2023.11)
> 
> Re-Tested on 6.8-rc1
> 
>> reg
>> is not necessary gpio-mux as per gpio-mux.yaml
> The error is not about reg property, it is about the node name:
> 
> mux-controller {
>      compatible = "gpio-mux";
>      ...
> };
> 
>    DTC_CHK arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dtb
> .../arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dtb: syscon at 43000000: 'mux-controller' does not match any of the regexes: '^chipid@[0-9a-f]+$', '^clock-controller@[0-9a-f]+$', '^mux-controller@[0-9a-f]+$', 'phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#

This is an existing issue that we are working to fix. Nothing you
can do about it, all boards that include k3-am64-main.dtsi
will have this warning currently.

Andrew

>>
>>> - unevaluated properties: interrupts, interrupt-parent
>>>    sensors and flash yaml are missing interrupt descriptions, but these
>>>    parts definitely have an interrupt signal in this solidrun board.
>>>
>> Please add them to appropriate schema as necessary
> Okay.
> Looks like it is only two:
> .../arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dtb: humidity-sensor at 41: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
>         from schema $id: http://devicetree.org/schemas/iio/humidity/ti,hdc2010.yaml#
> .../arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dtb: flash at 0: Unevaluated properties are not allowed ('interrupt-parent', 'interrupts' were unexpected)
>         from schema $id: http://devicetree.org/schemas/mtd/jedec,spi-nor.yaml#
>>
>>> - wrong names for pinctrl nodes
>>>    Other TI DTSs consistently end with *-pins-default. Should a different
>>>    naming convention be used?
>>>
>> No, pinctrl nodes need to end in -pins. All TI boards have been updated
>> to new schema [0] and sysconfig tool on dev.ti.com/sysconfig generates
>> appropriately. Please fix
> Okay, will do ...
>>
>>
>>> - cdns,phy-type required property
>>>    inherited from k3-am64-main.dtsi
>>>    there is a PHY_NONE value in dt-bindings/phy/phy.h,
>>>    but not allowed in phy-cadence-torrent.yaml
>>>
>> Sorry, I didnt get what's the issue wrt cdns,phy-type ?
> There were two issues, but they both disappeared as per 6.8-rc1 :)
>>
>>
>> Note, I really don't want to accept patches that add new dtbs_check
>> issues especially for nodes that already have YAML bindings. Please
>> update the .yaml files as necessary.
> I have succeeded locally getting rid of all but one, the node name of mux-controller mentioned above.
> Will include yaml patches in next version.
>>
>> [0]
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a49568115143435390f20965902809471b6f830c
>>
>>



More information about the linux-arm-kernel mailing list