[PATCH v10 06/14] PCI: imx6: Simplify switch-case logic by involve init_phy callback

Frank Li Frank.Li at nxp.com
Mon Feb 5 09:33:27 PST 2024


Instead of using the switch case statement to initialize the PHY handled by
this driver itself, let's introduce a new callback init_phy() and define it
for platforms that require it. This simplifies the code.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---

Notes:
    Change from v7 to v8:
    - rework commit message
    - wrap comments to 100 chars
    - return 0 at imx7d_pcie_init_phy()
    
    change from v1 to v4:
    - none

 drivers/pci/controller/dwc/pci-imx6.c | 134 +++++++++++++-------------
 1 file changed, 69 insertions(+), 65 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 4eeaf54709afd..c266b9f098a5b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -69,6 +69,9 @@ enum imx6_pcie_variants {
 #define IMX6_PCIE_MAX_CLKS       6
 
 #define IMX6_PCIE_MAX_INSTANCES			2
+
+struct imx6_pcie;
+
 struct imx6_pcie_drvdata {
 	enum imx6_pcie_variants variant;
 	enum dw_pcie_device_mode mode;
@@ -81,6 +84,7 @@ struct imx6_pcie_drvdata {
 	const u32 ltssm_mask;
 	const u32 mode_off[IMX6_PCIE_MAX_INSTANCES];
 	const u32 mode_mask[IMX6_PCIE_MAX_INSTANCES];
+	int (*init_phy)(struct imx6_pcie *pcie);
 };
 
 struct imx6_pcie {
@@ -322,76 +326,66 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
 	return 0;
 }
 
-static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+static int imx8mq_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 {
-	switch (imx6_pcie->drvdata->variant) {
-	case IMX8MM:
-	case IMX8MM_EP:
-	case IMX8MP:
-	case IMX8MP_EP:
-		/*
-		 * The PHY initialization had been done in the PHY
-		 * driver, break here directly.
-		 */
-		break;
-	case IMX8MQ:
-	case IMX8MQ_EP:
-		/*
-		 * TODO: Currently this code assumes external
-		 * oscillator is being used
-		 */
+	/* TODO: Currently this code assumes external oscillator is being used */
+	regmap_update_bits(imx6_pcie->iomuxc_gpr,
+			   imx6_pcie_grp_offset(imx6_pcie),
+			   IMX8MQ_GPR_PCIE_REF_USE_PAD,
+			   IMX8MQ_GPR_PCIE_REF_USE_PAD);
+	/*
+	 * Regarding the datasheet, the PCIE_VPH is suggested to be 1.8V. If the PCIE_VPH is
+	 * supplied by 3.3V, the VREG_BYPASS should be cleared to zero.
+	 */
+	if (imx6_pcie->vph && regulator_get_voltage(imx6_pcie->vph) > 3000000)
 		regmap_update_bits(imx6_pcie->iomuxc_gpr,
 				   imx6_pcie_grp_offset(imx6_pcie),
-				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
-				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
-		/*
-		 * Regarding the datasheet, the PCIE_VPH is suggested
-		 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
-		 * VREG_BYPASS should be cleared to zero.
-		 */
-		if (imx6_pcie->vph &&
-		    regulator_get_voltage(imx6_pcie->vph) > 3000000)
-			regmap_update_bits(imx6_pcie->iomuxc_gpr,
-					   imx6_pcie_grp_offset(imx6_pcie),
-					   IMX8MQ_GPR_PCIE_VREG_BYPASS,
-					   0);
-		break;
-	case IMX7D:
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
-		break;
-	case IMX6SX:
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6SX_GPR12_PCIE_RX_EQ_MASK,
-				   IMX6SX_GPR12_PCIE_RX_EQ_2);
-		fallthrough;
-	default:
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+				   IMX8MQ_GPR_PCIE_VREG_BYPASS,
+				   0);
+
+	return 0;
+}
+
+static int imx7d_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+
+	return 0;
+}
+
+static int imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				   IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
 
-		/* configure constant input signal to the pcie ctrl and phy */
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-				   IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-				   IMX6Q_GPR8_TX_DEEMPH_GEN1,
-				   imx6_pcie->tx_deemph_gen1 << 0);
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-				   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
-				   imx6_pcie->tx_deemph_gen2_3p5db << 6);
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-				   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
-				   imx6_pcie->tx_deemph_gen2_6db << 12);
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-				   IMX6Q_GPR8_TX_SWING_FULL,
-				   imx6_pcie->tx_swing_full << 18);
-		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-				   IMX6Q_GPR8_TX_SWING_LOW,
-				   imx6_pcie->tx_swing_low << 25);
-		break;
-	}
+	/* configure constant input signal to the pcie ctrl and phy */
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
+
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			   IMX6Q_GPR8_TX_DEEMPH_GEN1,
+			   imx6_pcie->tx_deemph_gen1 << 0);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+			   imx6_pcie->tx_deemph_gen2_3p5db << 6);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+			   imx6_pcie->tx_deemph_gen2_6db << 12);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			   IMX6Q_GPR8_TX_SWING_FULL,
+			   imx6_pcie->tx_swing_full << 18);
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
+			   IMX6Q_GPR8_TX_SWING_LOW,
+			   imx6_pcie->tx_swing_low << 25);
+	return 0;
+}
 
-	imx6_pcie_configure_type(imx6_pcie);
+static int imx6sx_pcie_init_phy(struct imx6_pcie *imx6_pcie)
+{
+	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
+			   IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2);
+
+	return imx6_pcie_init_phy(imx6_pcie);
 }
 
 static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
@@ -902,7 +896,11 @@ static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
 	}
 
 	imx6_pcie_assert_core_reset(imx6_pcie);
-	imx6_pcie_init_phy(imx6_pcie);
+
+	if (imx6_pcie->drvdata->init_phy)
+		imx6_pcie->drvdata->init_phy(imx6_pcie);
+
+	imx6_pcie_configure_type(imx6_pcie);
 
 	ret = imx6_pcie_clk_enable(imx6_pcie);
 	if (ret) {
@@ -1380,6 +1378,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+		.init_phy = imx6_pcie_init_phy,
 	},
 	[IMX6SX] = {
 		.variant = IMX6SX,
@@ -1393,6 +1392,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+		.init_phy = imx6sx_pcie_init_phy,
 	},
 	[IMX6QP] = {
 		.variant = IMX6QP,
@@ -1407,6 +1407,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX6Q_GPR12_PCIE_CTL_2,
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+		.init_phy = imx6_pcie_init_phy,
 	},
 	[IMX7D] = {
 		.variant = IMX7D,
@@ -1418,6 +1419,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.clks_cnt = ARRAY_SIZE(imx6q_clks),
 		.mode_off[0] = IOMUXC_GPR12,
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
+		.init_phy = imx7d_pcie_init_phy,
 	},
 	[IMX8MQ] = {
 		.variant = IMX8MQ,
@@ -1430,6 +1432,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.mode_off[1] = IOMUXC_GPR12,
 		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+		.init_phy = imx8mq_pcie_init_phy,
 	},
 	[IMX8MM] = {
 		.variant = IMX8MM,
@@ -1465,6 +1468,7 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.mode_off[1] = IOMUXC_GPR12,
 		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
+		.init_phy = imx8mq_pcie_init_phy,
 	},
 	[IMX8MM_EP] = {
 		.variant = IMX8MM_EP,
-- 
2.34.1




More information about the linux-arm-kernel mailing list