[PATCH v3 2/5] arm64: dts: ti: k3-am62/a: use sub-node for USB_PHY_CTRL registers

[Andrew Davis]

On 2/1/24 6:03 AM, Roger Quadros wrote:
> Exposing the entire CTRL_MMR space to syscon is not a good idea.
> Add sub-nodes for USB0_PHY_CTRL and USB1_PHY_CTRL and use them
> in the USB0/USB1 nodes.
> 
> Signed-off-by: Roger Quadros <rogerq at kernel.org>
> ---
> 

Reviewed-by: Andrew Davis <afd at ti.com>

> Notes:
>      Changelog:
>      
>      v3 - no change
>      
>      v2:
>      - moved am62p changes to next patch
>      - use new compatible for USB PHY CTRL node
> 
>   arch/arm64/boot/dts/ti/k3-am62-main.dtsi    |  4 ++--
>   arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi  | 10 ++++++++++
>   arch/arm64/boot/dts/ti/k3-am62a-main.dtsi   |  4 ++--
>   arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 10 ++++++++++
>   4 files changed, 24 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> index 464b7565d085..9432ed344d52 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
> @@ -625,7 +625,7 @@ usbss0: dwc3-usb at f900000 {
>   		reg = <0x00 0x0f900000 0x00 0x800>;
>   		clocks = <&k3_clks 161 3>;
>   		clock-names = "ref";
> -		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
> +		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
> @@ -648,7 +648,7 @@ usbss1: dwc3-usb at f910000 {
>   		reg = <0x00 0x0f910000 0x00 0x800>;
>   		clocks = <&k3_clks 162 3>;
>   		clock-names = "ref";
> -		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
> +		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> index fef76f52a52e..817700b2eacf 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> @@ -19,6 +19,16 @@ chipid: chipid at 14 {
>   			compatible = "ti,am654-chipid";
>   			reg = <0x14 0x4>;
>   		};
> +
> +		usb0_phy_ctrl: syscon at 4008 {
> +			compatible = "ti,am62-usb-phy-ctrl", "syscon";
> +			reg = <0x4008 0x4>;
> +		};
> +
> +		usb1_phy_ctrl: syscon at 4018 {
> +			compatible = "ti,am62-usb-phy-ctrl", "syscon";
> +			reg = <0x4018 0x4>;
> +		};
>   	};
>   
>   	wkup_uart0: serial at 2b300000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> index f0b8c9ab1459..8311c7c44cd3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
> @@ -566,7 +566,7 @@ usbss0: dwc3-usb at f900000 {
>   		reg = <0x00 0x0f900000 0x00 0x800>;
>   		clocks = <&k3_clks 161 3>;
>   		clock-names = "ref";
> -		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
> +		ti,syscon-phy-pll-refclk = <&usb0_phy_ctrl 0x0>;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
> @@ -589,7 +589,7 @@ usbss1: dwc3-usb at f910000 {
>   		reg = <0x00 0x0f910000 0x00 0x800>;
>   		clocks = <&k3_clks 162 3>;
>   		clock-names = "ref";
> -		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;
> +		ti,syscon-phy-pll-refclk = <&usb1_phy_ctrl 0x0>;
>   		#address-cells = <2>;
>   		#size-cells = <2>;
>   		power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> index 4e8279fa01e1..4a375f5e0c19 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
> @@ -17,6 +17,16 @@ chipid: chipid at 14 {
>   			compatible = "ti,am654-chipid";
>   			reg = <0x14 0x4>;
>   		};
> +
> +		usb0_phy_ctrl: syscon at 4008 {
> +			compatible = "ti,am62-usb-phy-ctrl", "syscon";
> +			reg = <0x4008 0x4>;
> +		};
> +
> +		usb1_phy_ctrl: syscon at 4018 {
> +			compatible = "ti,am62-usb-phy-ctrl", "syscon";
> +			reg = <0x4018 0x4>;
> +		};
>   	};
>   
>   	wkup_uart0: serial at 2b300000 {