[PATCH v2 3/4] arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB

[Dragan Simic]

On 2024-02-01 13:11, Andy Yan wrote:
> According to the schematic, USB20 HOST0 and HOST1 each have their own
> independent power supply, but these two regulators controlled by a
> same GPIO, so give it a more appropriate name.
> 
> Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588
> based board Cool Pi CM5 EVB")
> Signed-off-by: Andy Yan <andyshrk at 163.com>

Looking good to me.

Reviewed-by: Dragan Simic <dsimic at manjaro.org>

> ---
> 
> Changes in v2:
> - Add two lable for this regulator
> 
>  arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> index 1b5681fe0471..9c0f408ef339 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts
> @@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator {
>  		vin-supply = <&vcc3v3_sys>;
>  	};
> 
> -	vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
> +	vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc5v0_host";
>  		regulator-boot-on;
> @@ -200,12 +200,12 @@ &u2phy3 {
>  };
> 
>  &u2phy2_host {
> -	phy-supply = <&vcc5v0_usb30_host>;
> +	phy-supply = <&vcc5v0_usb_host1>;
>  	status = "okay";
>  };
> 
>  &u2phy3_host {
> -	phy-supply = <&vcc5v0_usb30_host>;
> +	phy-supply = <&vcc5v0_usb_host2>;
>  	status = "okay";
>  };