[PATCH v2 2/2] ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC
Joel Stanley
joel at jms.id.au
Mon Apr 29 18:23:27 PDT 2024
Hi Zev,
On Mon, 20 Nov 2023 at 22:50, Zev Weiss <zev at bewilderbeest.net> wrote:
>
> This is a Xeon board broadly similar (aside from CPU vendor) to the
> already-support romed8hm3 (half-width, single-socket, ast2500). It
> doesn't require anything terribly special for OpenBMC support, so this
> device-tree should provide everything necessary for basic
> functionality with it.
We've had these in the aspeed tree for a while, but as I was on leave
there was no pull request. I'm just putting one together now and
noticed some unusual looking device tree compatibles:
WARNING: DT compatible string "renesas,isl69269" appears un-documented
-- check ./Documentation/devicetree/bindings/
#220: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:181:
+ compatible = "renesas,isl69269", "isl69269";
WARNING: DT compatible string "isl69269" appears un-documented --
check ./Documentation/devicetree/bindings/
#220: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:181:
+ compatible = "renesas,isl69269", "isl69269";
WARNING: DT compatible string "st,24c128" appears un-documented --
check ./Documentation/devicetree/bindings/
#230: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:191:
+ compatible = "st,24c128", "atmel,24c128";
Can you update the patch to be checkpatch clean when applied to v6.9?
Cheers,
Joel
>
> Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
> ---
> arch/arm/boot/dts/aspeed/Makefile | 1 +
> .../aspeed/aspeed-bmc-asrock-spc621d8hm3.dts | 324 ++++++++++++++++++
> 2 files changed, 325 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index d3ac20e316d0..2df0a2e88df7 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-asrock-e3c246d4i.dtb \
> aspeed-bmc-asrock-romed8hm3.dtb \
> + aspeed-bmc-asrock-spc621d8hm3.dtb \
> aspeed-bmc-bytedance-g220a.dtb \
> aspeed-bmc-delta-ahe50dc.dtb \
> aspeed-bmc-facebook-bletchley.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
> new file mode 100644
> index 000000000000..555485871e7a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
> @@ -0,0 +1,324 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/{
> + model = "ASRock SPC621D8HM3 BMC";
> + compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
> +
> + aliases {
> + serial4 = &uart5;
> +
> + i2c20 = &i2c1mux0ch0;
> + i2c21 = &i2c1mux0ch1;
> + };
> +
> + chosen {
> + stdout-path = &uart5;
> + };
> +
> + memory at 80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + /* BMC heartbeat */
> + led-0 {
> + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> + function = LED_FUNCTION_HEARTBEAT;
> + color = <LED_COLOR_ID_GREEN>;
> + linux,default-trigger = "timer";
> + };
> +
> + /* system fault */
> + led-1 {
> + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> + function = LED_FUNCTION_FAULT;
> + color = <LED_COLOR_ID_RED>;
> + panic-indicator;
> + };
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> + };
> +};
> +
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>; /* 50 MHz */
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> + aspeed,lpc-io-reg = <0x2f8>;
> + aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +
> + nvmem-cells = <ð0_macaddress>;
> + nvmem-cell-names = "mac-address";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + /* hardware monitor/thermal sensor */
> + temperature-sensor at 29 {
> + compatible = "nuvoton,nct7802";
> + reg = <0x29>;
> + };
> +
> + /* motherboard temp sensor (TMP1, near BMC) */
> + temperature-sensor at 4c {
> + compatible = "nuvoton,w83773g";
> + reg = <0x4c>;
> + };
> +
> + /* motherboard FRU eeprom */
> + eeprom at 50 {
> + compatible = "st,24c128", "atmel,24c128";
> + reg = <0x50>;
> + pagesize = <16>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + eth0_macaddress: macaddress at 3f80 {
> + reg = <0x3f80 6>;
> + };
> + };
> +
> + /* M.2 slot smbus mux */
> + i2c-mux at 71 {
> + compatible = "nxp,pca9545";
> + reg = <0x71>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c1mux0ch0: i2c at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + };
> +
> + i2c1mux0ch1: i2c at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <1>;
> + };
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +};
> +
> +&i2c5 {
> + status = "okay";
> +};
> +
> +&i2c6 {
> + status = "okay";
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c8 {
> + status = "okay";
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c10 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +};
> +
> +&i2c12 {
> + status = "okay";
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> +};
> +
> +&lpc_snoop {
> + status = "okay";
> + snoop-ports = <0x80>;
> +};
> +
> +&kcs3 {
> + status = "okay";
> + aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&peci0 {
> + status = "okay";
> +};
> +
> +&pwm_tacho {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_default
> + &pinctrl_pwm2_default
> + &pinctrl_pwm3_default
> + &pinctrl_pwm4_default>;
> +
> + fan at 0 {
> + reg = <0x00>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> + };
> +
> + fan at 2 {
> + reg = <0x02>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> + };
> +
> + fan at 3 {
> + reg = <0x03>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> + };
> +
> + fan at 4 {
> + reg = <0x04>;
> + aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> + };
> +};
> +
> +&gpio {
> + status = "okay";
> + gpio-line-names =
> + /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
> + "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
> + "", "", "", "",
> + /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
> + "", "", "", "GPIO_RST",
> + /* C */ "", "", "", "", "", "", "", "",
> + /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
> + "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
> + "NMI_BTN_N", "BMC_NMI",
> + "", "",
> + /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
> + /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
> + "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
> + "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
> + "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
> + /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
> + "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
> + /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
> + "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
> + /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
> + "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
> + "", "", "", "",
> + /* J */ "", "", "", "", "", "", "", "",
> + /* K */ "", "", "", "", "", "", "", "",
> + /* L */ "", "", "", "", "", "", "", "",
> + /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
> + "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
> + "FM_CPU1_PROCHOT_BMC_LVC3_N", "",
> + "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
> + /* N */ "", "", "", "", "", "", "", "",
> + /* O */ "", "", "", "", "", "", "", "",
> + /* P */ "", "", "", "", "", "", "", "",
> + /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
> + /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
> + "", "FM_BMC_PCH_SCI_LPC_N", "", "",
> + /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
> + "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
> + "", "", "", "",
> + /* T */ "", "", "", "", "", "", "", "",
> + /* U */ "", "", "", "", "", "", "", "",
> + /* V */ "", "", "", "", "", "", "", "",
> + /* W */ "", "", "", "", "", "", "", "",
> + /* X */ "", "", "", "", "", "", "", "",
> + /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
> + "", "", "", "",
> + /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
> + "", "", "", "",
> + /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
> + "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
> + "", "IRQ_SML0_ALERT_MUX_N",
> + "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
> + /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
> + "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
> + "", "", "", "",
> + /* AC */ "", "", "", "", "", "", "", "";
> +};
> +
> +&adc {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
> + &pinctrl_adc1_default /* 5VSB */
> + &pinctrl_adc2_default /* CPU1 */
> + &pinctrl_adc3_default /* NC */
> + &pinctrl_adc4_default /* VCCMABCD */
> + &pinctrl_adc5_default /* VCCMEFGH */
> + &pinctrl_adc6_default /* NC */
> + &pinctrl_adc7_default /* NC */
> + &pinctrl_adc8_default /* PVNN_PCH */
> + &pinctrl_adc9_default /* 1P05PCH */
> + &pinctrl_adc10_default /* 1P8PCH */
> + &pinctrl_adc11_default /* BAT */
> + &pinctrl_adc12_default /* 3V */
> + &pinctrl_adc13_default /* 5V */
> + &pinctrl_adc14_default /* 12V */
> + &pinctrl_adc15_default>; /* GND */
> +};
> --
> 2.42.0
>
More information about the linux-arm-kernel
mailing list