[PATCH v2 1/2] dt-bindings: mfd: Convert lp873x.txt to json-schema

[Nathan Morrisson]

Convert the lp873x binding to DT schema format. The gpio-controller
and #gpio-cells properties were removed from required because using
the device as a GPIO controller is optional.

Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>
---
v2:
  - Added "mfd:" to subject prefix
  - Added vendor TI to file name
  - Updated title to match hardware
  - Removed | where we do not need to preserve formatting
  - Added *-in-supply back to required properties, they should not have been removed
  - Added explanation for why gpio properties were removed from required
  - Updated the example to be more generic and got rid of unnecessary i2c node

 .../devicetree/bindings/mfd/lp873x.txt        |  67 -----------
 .../devicetree/bindings/mfd/ti,lp8732.yaml    | 112 ++++++++++++++++++
 2 files changed, 112 insertions(+), 67 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/lp873x.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp8732.yaml

diff --git a/Documentation/devicetree/bindings/mfd/lp873x.txt b/Documentation/devicetree/bindings/mfd/lp873x.txt
deleted file mode 100644
index ae9cf39bd101..000000000000
--- a/Documentation/devicetree/bindings/mfd/lp873x.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-TI LP873X PMIC MFD driver
-
-Required properties:
-  - compatible:	"ti,lp8732", "ti,lp8733"
-  - reg:		I2C slave address.
-  - gpio-controller:	Marks the device node as a GPIO Controller.
-  - #gpio-cells:	Should be two.  The first cell is the pin number and
-			the second cell is used to specify flags.
-			See ../gpio/gpio.txt for more information.
-  - xxx-in-supply:	Phandle to parent supply node of each regulator
-			populated under regulators node. xxx can be
-			buck0, buck1, ldo0 or ldo1.
-  - regulators:	List of child nodes that specify the regulator
-			initialization data.
-Example:
-
-pmic: lp8733 at 60 {
-	compatible = "ti,lp8733";
-	reg = <0x60>;
-	gpio-controller;
-	#gpio-cells = <2>;
-
-	buck0-in-supply = <&vsys_3v3>;
-	buck1-in-supply = <&vsys_3v3>;
-	ldo0-in-supply = <&vsys_3v3>;
-	ldo1-in-supply = <&vsys_3v3>;
-
-	regulators {
-		lp8733_buck0: buck0 {
-			regulator-name = "lp8733-buck0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		lp8733_buck1: buck1 {
-			regulator-name = "lp8733-buck1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-min-microamp = <1500000>;
-			regulator-max-microamp = <4000000>;
-			regulator-ramp-delay = <10000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo0: ldo0 {
-			regulator-name = "lp8733-ldo0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		lp8733_ldo1: ldo1 {
-			regulator-name = "lp8733-ldo1";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml b/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml
new file mode 100644
index 000000000000..9a90cee2b545
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,lp8732.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp8732.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP873X Power Management Integrated Circuit
+
+maintainers:
+  - J Keerthy <j-keerthy at ti.com>
+
+description:
+  PMIC with two high-current buck converters and two linear regulators.
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8732
+      - ti,lp8733
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  regulators:
+    description:
+      List of child nodes that specify the regulator initialization data.
+    type: object
+    patternProperties:
+      "^buck[01]|ldo[01]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+patternProperties:
+  '^(buck[01]|ldo[01])-in-supply$':
+    description: Phandle to parent supply of each regulator populated under regulators node.
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - buck0-in-supply
+  - buck1-in-supply
+  - ldo0-in-supply
+  - ldo1-in-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic at 60 {
+            compatible = "ti,lp8733";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            buck0-in-supply = <&vsys_3v3>;
+            buck1-in-supply = <&vsys_3v3>;
+            ldo0-in-supply = <&vsys_3v3>;
+            ldo1-in-supply = <&vsys_3v3>;
+
+            regulators {
+                buck0: buck0 {
+                    regulator-name = "buck0";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-min-microamp = <1500000>;
+                    regulator-max-microamp = <4000000>;
+                    regulator-ramp-delay = <10000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck1: buck1 {
+                    regulator-name = "buck1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-min-microamp = <1500000>;
+                    regulator-max-microamp = <4000000>;
+                    regulator-ramp-delay = <10000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo0: ldo0 {
+                    regulator-name = "ldo0";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: ldo1 {
+                    regulator-name = "ldo1";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
-- 
2.25.1