[PATCH v2 2/2] arm64: dts: ti: phycore-am64: Add PMIC
Nathan Morrisson
nmorrisson at phytec.com
Mon Apr 29 12:58:30 PDT 2024
Add a PMIC node to the phycore-am64 device tree.
Signed-off-by: Nathan Morrisson <nmorrisson at phytec.com>
---
v2: No change
.../boot/dts/ti/k3-am64-phycore-som.dtsi | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 125e507966fb..2c3b20ddfb8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -265,6 +265,50 @@ i2c_som_rtc: rtc at 52 {
interrupts = <70 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
+
+ pmic at 61 {
+ compatible = "ti,lp8733";
+ reg = <0x61>;
+
+ buck0-in-supply = <&vcc_5v0_som>;
+ buck1-in-supply = <&vcc_5v0_som>;
+ ldo0-in-supply = <&vdd_3v3>;
+ ldo1-in-supply = <&vdd_3v3>;
+
+ regulators {
+ vdd_core: buck0 {
+ regulator-name = "VDD_CORE";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_3v3: buck1 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8_ldo0: ldo0 {
+ regulator-name = "VDD_1V8_LDO0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdda_1v8: ldo1 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
};
&main_r5fss0_core0 {
--
2.25.1
More information about the linux-arm-kernel
mailing list