[PATCH] ASoC: sunxi: DMIC: Add controls for adjusting the mic gains

[Joao Schim]

On 4/26/24 16:39, Jernej Škrabec wrote:
> Dne četrtek, 25. april 2024 ob 13:03:56 GMT +2 je Joao Schim napisal(a):
>> On 4/24/24 20:42, Jernej Škrabec wrote:
>>> Hi Joao,
>> Hi Jernej,  thanks for your prompt response.
>>> Dne ponedeljek, 22. april 2024 ob 17:02:13 GMT +2 je Joao Schim napisal(a):
>>>> The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
>>>> the gain (left + right) of each of the four supported channels.
>>>>
>>>> Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
>>> Add SoB tag.
>> Yeah, i realized that too late. Thanks for bringing that to my
>> attention. I will add it in v1.
>>>> ---
>>>>    sound/soc/sunxi/sun50i-dmic.c | 34 ++++++++++++++++++++++++++++++++++
>>>>    1 file changed, 34 insertions(+)
>>>>
>>>> diff --git a/sound/soc/sunxi/sun50i-dmic.c b/sound/soc/sunxi/sun50i-dmic.c
>>>> index c76628bc86c6..f8613d8c3462 100644
>>>> --- a/sound/soc/sunxi/sun50i-dmic.c
>>>> +++ b/sound/soc/sunxi/sun50i-dmic.c
>>>> @@ -14,6 +14,7 @@
>>>>    #include <sound/dmaengine_pcm.h>
>>>>    #include <sound/pcm_params.h>
>>>>    #include <sound/soc.h>
>>>> +#include <sound/tlv.h>
>>>>    
>>>>    #define SUN50I_DMIC_EN_CTL			(0x00)
>>>>    	#define SUN50I_DMIC_EN_CTL_GLOBE			BIT(8)
>>>> @@ -43,6 +44,17 @@
>>>>    	#define SUN50I_DMIC_CH_NUM_N_MASK			GENMASK(2, 0)
>>>>    #define SUN50I_DMIC_CNT				(0x2c)
>>>>    	#define SUN50I_DMIC_CNT_N				(1 << 0)
>>>> +#define SUN50I_DMIC_D0D1_VOL_CTR		(0x30)
>>>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_0R			(0)
>>>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_0L			(8)
>>>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_1R			(16)
>>>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_1L			(24)
>>>> +#define SUN50I_DMIC_D2D3_VOL_CTR                (0x34)
>>>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_2R                     (0)
>>>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_2L                     (8)
>>>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_3R                     (16)
>>>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_3L                     (24)
>>>> +
>>>>    #define SUN50I_DMIC_HPF_CTRL			(0x38)
>>>>    #define SUN50I_DMIC_VERSION			(0x50)
>>>>    
>>>> @@ -273,8 +285,30 @@ static const struct of_device_id sun50i_dmic_of_match[] = {
>>>>    };
>>>>    MODULE_DEVICE_TABLE(of, sun50i_dmic_of_match);
>>>>    
>>>> +static const DECLARE_TLV_DB_SCALE(sun50i_dmic_vol_scale, -12000, 75, 1);
>>> DECLARE_TLV_DB_SCALE is old name, SNDRV_CTL_TLVD_DECLARE_DB_SCALE should be
>>> used instead.
>> I can't seem to find that define in HEAD. what code-base are you
>> referring to that i should checkout ?
> Here is define:
> https://elixir.bootlin.com/linux/v6.9-rc1/source/include/uapi/sound/tlv.h#L52
>
> However, I'm not sure if this message means DECLARE_TLV_DB_SCALE is
> deprecated or not:
> https://elixir.bootlin.com/linux/v6.9-rc1/source/include/sound/tlv.h#L12

Right, apparently i sneaked in another D in the name. That explains i 
could not find it.

Will send v1 in a few minutes. Thanks.

Kind regards,

Joao

> Best regards,
> Jernej
>
>>> Other than that, it looks fine.
>> Thanks.
>>
>>> Best regards,
>>> Jernej
>>>
>>>> +
>>>> +static const struct snd_kcontrol_new sun50i_dmic_controls[] = {
>>>> +
>>>> +        SOC_DOUBLE_TLV("DMIC Channel 0 Capture Volume", SUN50I_DMIC_D0D1_VOL_CTR,
>>>> +                       SUN50I_DMIC_D0D1_VOL_CTR_0L, SUN50I_DMIC_D0D1_VOL_CTR_0R,
>>>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>>>> +        SOC_DOUBLE_TLV("DMIC Channel 1 Capture Volume", SUN50I_DMIC_D0D1_VOL_CTR,
>>>> +                       SUN50I_DMIC_D0D1_VOL_CTR_1L, SUN50I_DMIC_D0D1_VOL_CTR_1R,
>>>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>>>> +        SOC_DOUBLE_TLV("DMIC Channel 2 Capture Volume", SUN50I_DMIC_D2D3_VOL_CTR,
>>>> +                       SUN50I_DMIC_D2D3_VOL_CTR_2L, SUN50I_DMIC_D2D3_VOL_CTR_2R,
>>>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>>>> +        SOC_DOUBLE_TLV("DMIC Channel 3 Capture Volume", SUN50I_DMIC_D2D3_VOL_CTR,
>>>> +                       SUN50I_DMIC_D2D3_VOL_CTR_3L, SUN50I_DMIC_D2D3_VOL_CTR_3R,
>>>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>>>> +
>>>> +
>>>> +};
>>>> +
>>>>    static const struct snd_soc_component_driver sun50i_dmic_component = {
>>>>    	.name           = "sun50i-dmic",
>>>> +	.controls	= sun50i_dmic_controls,
>>>> +	.num_controls	= ARRAY_SIZE(sun50i_dmic_controls),
>>>>    };
>>>>    
>>>>    static int sun50i_dmic_runtime_suspend(struct device *dev)
>>>>
>>>
>>>
>> Kind regards,
>>
>> Joao
>>
>>
>
>
>