[PATCH v3 3/3] arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dts

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Add a minimal dts for i.MX95 19x19 EVK board:
 - lpuart1 as console
 - sdhc1/2 as storage

As of now, because scmi pinctrl support not ready, so count on
bootloader to set the pinctrl.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile            |   1 +
 arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 111 ++++++++++++++++++++++
 2 files changed, 112 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bd443c2bc5a4..057e23fde780 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -236,6 +236,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
new file mode 100644
index 000000000000..4ca63ea1e787
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 NXP
+ */
+
+/dts-v1/;
+
+#include "imx95.dtsi"
+
+/ {
+	model = "NXP i.MX95 19X19 board";
+	compatible = "fsl,imx95-19x19-evk", "fsl,imx95";
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	memory at 80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&lpuart1 {
+	/* console */
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&usdhc2 {
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};

-- 
2.37.1