[PATCH 09/15] i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()

Wolfram Sang wsa+renesas at sang-engineering.com
Sat Apr 27 13:36:01 PDT 2024


There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
---
 drivers/i2c/busses/i2c-stm32f7.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 01210452216b..cfee2d9c09de 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1789,7 +1789,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
 	struct stm32_i2c_dma *dma = i2c_dev->dma;
 	struct device *dev = i2c_dev->dev;
-	unsigned long timeout;
+	unsigned long time_left;
 	int i, ret;
 
 	f7_msg->addr = addr;
@@ -1809,8 +1809,8 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 	if (ret)
 		goto pm_free;
 
-	timeout = wait_for_completion_timeout(&i2c_dev->complete,
-					      i2c_dev->adap.timeout);
+	time_left = wait_for_completion_timeout(&i2c_dev->complete,
+						i2c_dev->adap.timeout);
 	ret = f7_msg->result;
 	if (ret) {
 		if (i2c_dev->use_dma)
@@ -1826,7 +1826,7 @@ static int stm32f7_i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 		goto pm_free;
 	}
 
-	if (!timeout) {
+	if (!time_left) {
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_sync(dma->chan_using);
-- 
2.43.0




More information about the linux-arm-kernel mailing list