[PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Estevam]

Hi Fabio,

On Fri, Apr 26, 2024 at 12:31 PM Fabio Aiuto <fabio.aiuto at engicam.com> wrote:

> +&usdhc3 { /* WiFi */
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +       pinctrl-0 = <&pinctrl_usdhc3>;
> +       pinctrl-1 = <&pinctrl_usdhc3>;
> +       pinctrl-2 = <&pinctrl_usdhc3>;
> +       mmc-pwrseq = <&usdhc3_pwrseq>;
> +       bus-width = <4>;
> +       no-1-8-v;
> +       non-removable;
> +       max-frequency = <25000000>;

Is this 25MHz limitation correct?