[PATCH] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C

[Wadim Egorov]

Hi Garrett,

thanks for sending!

It seems like this patch completes the board's support. Every 
interface/component is now fully supported.

Am 25.04.24 um 17:25 schrieb Garrett Giordano:
> The USB-C PD manages plug orientation, power delivery, and our endpoint
> for the USB interface. Add this node and include its endpoint.
> 
> Configure USB0 for role-switching and wire it to our USB-C PD endpoint.
> 
> Signed-off-by: Garrett Giordano <ggiordano at phytec.com>

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   .../dts/ti/k3-am625-phyboard-lyra-rdk.dts     | 26 ++++++++++++++++++-
>   1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> index dfc78995d30a..fb3bc914a018 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> @@ -348,6 +348,24 @@ gpio_exp: gpio-expander at 21 {
>   				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
>   	};
>   
> +	usb-pd at 22 {
> +		compatible = "ti,tps6598x";
> +		reg = <0x22>;
> +
> +		connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			self-powered;
> +			data-role = "dual";
> +			power-role = "sink";
> +			port {
> +				usb_con_hs: endpoint {
> +					remote-endpoint = <&typec_hs>;
> +				};
> +			};
> +		};
> +	};
> +
>   	sii9022: bridge-hdmi at 39 {
>   		compatible = "sil,sii9022";
>   		reg = <0x39>;
> @@ -449,7 +467,13 @@ &usbss1 {
>   };
>   
>   &usb0 {
> -	dr_mode = "peripheral";
> +	usb-role-switch;
> +
> +	port {
> +		typec_hs: endpoint {
> +			remote-endpoint = <&usb_con_hs>;
> +		};
> +	};
>   };
>   
>   &usb1 {