[PATCH V2] drm/bridge: imx: Fix unmet depenency for PHY_FSL_SAMSUNG_HDMI_PHY

[Laurent Pinchart]

Hi Adam,

Thank you for the patch.

On Mon, Apr 22, 2024 at 05:33:52AM -0500, Adam Ford wrote:
> When enabling i.MX8MP DWC HDMI driver, it automatically selects
> PHY_FSL_SAMSUNG_HDMI_PHY, since it wont' work without the phy.
> This may cause some Kconfig warnings during various build tests.
> Fix this by implying the phy instead of selecting the phy.
> 
> To prevent this from happening with the DRM_IMX8MP_HDMI_PVI, also
> imply it instead of selecting it.
> 
> Fixes: 1f36d634670d ("drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI")
> Reported-by: kernel test robot <lkp at intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202404190103.lLm8LtuP-lkp@intel.com/
> Signed-off-by: Adam Ford <aford173 at gmail.com>

This looks sensible to me.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> V2:  Change DRM_IMX8MP_HDMI_PVI at the same time since it was affected
>      from the same commit.
> 
> diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
> index 7687ed652df5..13142a6b8590 100644
> --- a/drivers/gpu/drm/bridge/imx/Kconfig
> +++ b/drivers/gpu/drm/bridge/imx/Kconfig
> @@ -8,8 +8,8 @@ config DRM_IMX8MP_DW_HDMI_BRIDGE
>  	depends on COMMON_CLK
>  	depends on DRM_DW_HDMI
>  	depends on OF
> -	select DRM_IMX8MP_HDMI_PVI
> -	select PHY_FSL_SAMSUNG_HDMI_PHY
> +	imply DRM_IMX8MP_HDMI_PVI
> +	imply PHY_FSL_SAMSUNG_HDMI_PHY
>  	help
>  	  Choose this to enable support for the internal HDMI encoder found
>  	  on the i.MX8MP SoC.

-- 
Regards,

Laurent Pinchart