[PATCH] ASoC: sunxi: DMIC: Add controls for adjusting the mic gains

[Joao Schim]

On 4/24/24 20:42, Jernej Škrabec wrote:
> Hi Joao,
Hi Jernej,  thanks for your prompt response.
>
> Dne ponedeljek, 22. april 2024 ob 17:02:13 GMT +2 je Joao Schim napisal(a):
>> The AllWinner H6 and later SoCs that sport a DMIC block contain a set of registers to control
>> the gain (left + right) of each of the four supported channels.
>>
>> Add ASoC controls for changing each of the stereo channel gains using alsamixer and alike
> Add SoB tag.
Yeah, i realized that too late. Thanks for bringing that to my 
attention. I will add it in v1.
>
>> ---
>>   sound/soc/sunxi/sun50i-dmic.c | 34 ++++++++++++++++++++++++++++++++++
>>   1 file changed, 34 insertions(+)
>>
>> diff --git a/sound/soc/sunxi/sun50i-dmic.c b/sound/soc/sunxi/sun50i-dmic.c
>> index c76628bc86c6..f8613d8c3462 100644
>> --- a/sound/soc/sunxi/sun50i-dmic.c
>> +++ b/sound/soc/sunxi/sun50i-dmic.c
>> @@ -14,6 +14,7 @@
>>   #include <sound/dmaengine_pcm.h>
>>   #include <sound/pcm_params.h>
>>   #include <sound/soc.h>
>> +#include <sound/tlv.h>
>>   
>>   #define SUN50I_DMIC_EN_CTL			(0x00)
>>   	#define SUN50I_DMIC_EN_CTL_GLOBE			BIT(8)
>> @@ -43,6 +44,17 @@
>>   	#define SUN50I_DMIC_CH_NUM_N_MASK			GENMASK(2, 0)
>>   #define SUN50I_DMIC_CNT				(0x2c)
>>   	#define SUN50I_DMIC_CNT_N				(1 << 0)
>> +#define SUN50I_DMIC_D0D1_VOL_CTR		(0x30)
>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_0R			(0)
>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_0L			(8)
>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_1R			(16)
>> +	#define SUN50I_DMIC_D0D1_VOL_CTR_1L			(24)
>> +#define SUN50I_DMIC_D2D3_VOL_CTR                (0x34)
>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_2R                     (0)
>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_2L                     (8)
>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_3R                     (16)
>> +        #define SUN50I_DMIC_D2D3_VOL_CTR_3L                     (24)
>> +
>>   #define SUN50I_DMIC_HPF_CTRL			(0x38)
>>   #define SUN50I_DMIC_VERSION			(0x50)
>>   
>> @@ -273,8 +285,30 @@ static const struct of_device_id sun50i_dmic_of_match[] = {
>>   };
>>   MODULE_DEVICE_TABLE(of, sun50i_dmic_of_match);
>>   
>> +static const DECLARE_TLV_DB_SCALE(sun50i_dmic_vol_scale, -12000, 75, 1);
> DECLARE_TLV_DB_SCALE is old name, SNDRV_CTL_TLVD_DECLARE_DB_SCALE should be
> used instead.
I can't seem to find that define in HEAD. what code-base are you 
referring to that i should checkout ?
>
> Other than that, it looks fine.

Thanks.

> Best regards,
> Jernej
>
>> +
>> +static const struct snd_kcontrol_new sun50i_dmic_controls[] = {
>> +
>> +        SOC_DOUBLE_TLV("DMIC Channel 0 Capture Volume", SUN50I_DMIC_D0D1_VOL_CTR,
>> +                       SUN50I_DMIC_D0D1_VOL_CTR_0L, SUN50I_DMIC_D0D1_VOL_CTR_0R,
>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>> +        SOC_DOUBLE_TLV("DMIC Channel 1 Capture Volume", SUN50I_DMIC_D0D1_VOL_CTR,
>> +                       SUN50I_DMIC_D0D1_VOL_CTR_1L, SUN50I_DMIC_D0D1_VOL_CTR_1R,
>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>> +        SOC_DOUBLE_TLV("DMIC Channel 2 Capture Volume", SUN50I_DMIC_D2D3_VOL_CTR,
>> +                       SUN50I_DMIC_D2D3_VOL_CTR_2L, SUN50I_DMIC_D2D3_VOL_CTR_2R,
>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>> +        SOC_DOUBLE_TLV("DMIC Channel 3 Capture Volume", SUN50I_DMIC_D2D3_VOL_CTR,
>> +                       SUN50I_DMIC_D2D3_VOL_CTR_3L, SUN50I_DMIC_D2D3_VOL_CTR_3R,
>> +                       0xFF, 0, sun50i_dmic_vol_scale),
>> +
>> +
>> +};
>> +
>>   static const struct snd_soc_component_driver sun50i_dmic_component = {
>>   	.name           = "sun50i-dmic",
>> +	.controls	= sun50i_dmic_controls,
>> +	.num_controls	= ARRAY_SIZE(sun50i_dmic_controls),
>>   };
>>   
>>   static int sun50i_dmic_runtime_suspend(struct device *dev)
>>
>
>
>
Kind regards,

Joao