[PATCH] arm64: dts: ti: k3-am65-main: Add PRU system events for virtio

[Ravi Gunasekaran]

On 4/23/2024 3:38 PM, MD Danish Anwar wrote:
> From: Suman Anna <s-anna at ti.com>
>
> A PRU system event "vring" has been added to each PRU and RTU
> node in each of the ICSSG0, ICSSG1 and ICSSG2 remote processor
> subsystems to enable the virtio/rpmsg communication between MPU
> and that PRU/RTU core. The additions are done in the base
> k3-am65-main.dtsi, and so are inherited by all the K3 AM65x
> boards.
>
> The PRU system events is the preferred approach over using TI
> mailboxes, as it eliminates an external peripheral access from
> the PRU/RTU-side, and keeps the interrupt generation internal to
> the ICSSG. The difference from MPU would be minimal in using one
> versus the other.
>
> Mailboxes can still be used if desired, but currently there is
> no support on firmware-side for K3 SoCs to use mailboxes. Either
> approach would require that an appropriate firmware image is
> loaded/booted on the PRU.
>
> Signed-off-by: Suman Anna <s-anna at ti.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
> ---
> This patch is based on linux-next tag next-20240423
>
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 36 ++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 0d68aa8e946f..72aa3b9aacce 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>

Acked-by: Ravi Gunasekaran <r-gunasekaran at ti.com>

Regards,
Ravi