[PATCH v3 3/3] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support

Richard Zhu hongxing.zhu at nxp.com
Tue Apr 23 23:21:23 PDT 2024


Add i.MX8QM HSIO PHY driver support.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
 drivers/phy/freescale/Kconfig               |   8 +
 drivers/phy/freescale/Makefile              |   1 +
 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c | 607 ++++++++++++++++++++
 3 files changed, 616 insertions(+)
 create mode 100644 drivers/phy/freescale/phy-fsl-imx8qm-hsio.c

diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c06..c9ee48aeea9e 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,14 @@ config PHY_FSL_IMX8M_PCIE
 	  Enable this to add support for the PCIE PHY as found on
 	  i.MX8M family of SOCs.
 
+config PHY_FSL_IMX8QM_HSIO
+	tristate "Freescale i.MX8QM HSIO PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the HSIO PHY as found on
+	  i.MX8QM family of SOCs.
+
 endif
 
 config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4d2..b56b4d5c18ea 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -3,4 +3,5 @@ obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
 obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
 obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
 obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
+obj-$(CONFIG_PHY_FSL_IMX8QM_HSIO)	+= phy-fsl-imx8qm-hsio.o
 obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
new file mode 100644
index 000000000000..b3e17163e859
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-hsio.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/pci_regs.h>
+#include <linux/phy/phy.h>
+#include <linux/phy/pcie.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#define MAX_NUM_PHY_MIXS	4
+#define PHY_MIX_MAX_NUM_LANES	2
+#define LANE_NUM_CLKS		5
+
+/* Parameters for the waiting for PCIe PHY PLL to lock */
+#define PHY_INIT_WAIT_USLEEP_MAX	10
+#define PHY_INIT_WAIT_TIMEOUT		(1000 * PHY_INIT_WAIT_USLEEP_MAX)
+
+/* i.MX8Q HSIO registers */
+#define HSIO_CTRL0			0x0
+#define HSIO_APB_RSTN_0			BIT(0)
+#define HSIO_APB_RSTN_1			BIT(1)
+#define HSIO_PIPE_RSTN_0_MASK		GENMASK(25, 24)
+#define HSIO_PIPE_RSTN_1_MASK		GENMASK(27, 26)
+#define HSIO_MODE_MASK			GENMASK(20, 17)
+#define HSIO_MODE_PCIE			0x0
+#define HSIO_MODE_SATA			0x4
+#define HSIO_DEVICE_TYPE_MASK		GENMASK(27, 24)
+#define HSIO_EPCS_TXDEEMP		BIT(5)
+#define HSIO_EPCS_TXDEEMP_SEL		BIT(6)
+#define HSIO_EPCS_PHYRESET_N		BIT(7)
+#define HSIO_RESET_N			BIT(12)
+
+#define HSIO_IOB_RXENA			BIT(0)
+#define HSIO_IOB_TXENA			BIT(1)
+#define HSIO_IOB_A_0_TXOE		BIT(2)
+#define HSIO_IOB_A_0_M1M0_2		BIT(4)
+#define HSIO_IOB_A_0_M1M0_MASK		GENMASK(4, 3)
+#define HSIO_PHYX1_EPCS_SEL		BIT(12)
+#define HSIO_PCIE_AB_SELECT		BIT(13)
+
+#define HSIO_PHY_STS0			0x4
+#define HSIO_LANE0_TX_PLL_LOCK		BIT(4)
+#define HSIO_LANE1_TX_PLL_LOCK		BIT(12)
+
+#define HSIO_CTRL2			0x8
+#define HSIO_LTSSM_ENABLE		BIT(4)
+#define HSIO_BUTTON_RST_N		BIT(21)
+#define HSIO_PERST_N			BIT(22)
+#define HSIO_POWER_UP_RST_N		BIT(23)
+
+#define HSIO_PCIE_STS0			0xc
+#define HSIO_PM_REQ_CORE_RST		BIT(19)
+
+#define HSIO_REG48_PMA_STATUS		0x30
+#define HSIO_REG48_PMA_RDY		BIT(7)
+
+/*
+ * There are three lanes PHY in i.MX8QM HSIO, and can be made up the
+ * following PHY modes in different use cases.
+ * +------------------------------------+
+ * | index | LAN0  | LAN1  | LAN2       |
+ * |------------------------------------|
+ * | 0     | PCIEA |       |            |
+ * |------------------------------------|
+ * | 1     |       | PCIEB |            |
+ * |------------------------------------|
+ * | 2     | PCIEA | PCIEA |            |
+ * |------------------------------------|
+ * | 3     |       |       | PCIEB/SATA |
+ * +------------------------------------+
+ */
+enum phy_mode_index {
+	IMX8Q_HSIO_LANE0_PCIE_PHY,
+	IMX8Q_HSIO_LANE1_PCIE_PHY,
+	IMX8Q_HSIO_LANE0_1_PCIE_PHY,
+	IMX8Q_HSIO_LANE2_PHY
+};
+
+struct imx_hsio_drvdata {
+	int phy_mix_num;
+};
+
+struct imx_hsio_phy_lane {
+	const char * const *clk_names;
+	struct clk_bulk_data clks[LANE_NUM_CLKS];
+};
+
+struct imx_hsio_phy_mix {
+	u32 ctrl_index;
+	u32 ctrl_off;
+	u32 phy_off;
+	u32 phy_type;
+	struct imx_hsio_phy_lane lane[PHY_MIX_MAX_NUM_LANES];
+	struct imx_hsio_priv *priv;
+	struct phy *phy;
+	enum phy_mode pmix_mode;
+	enum phy_mode_index idx;
+};
+
+struct imx_hsio_priv {
+	void __iomem *base;
+	struct device *dev;
+	u32 refclk_pad;
+	u32 hsio_cfg;
+	struct regmap *phy;
+	struct regmap *ctrl;
+	struct regmap *misc;
+	const struct imx_hsio_drvdata *drvdata;
+	struct imx_hsio_phy_mix pmix[MAX_NUM_PHY_MIXS];
+};
+
+static const char * const lan0_pcie_clks[] = {"apb_pclk0", "pclk0", "ctl0_crr",
+					      "phy0_crr", "misc_crr"};
+static const char * const lan1_pciea_clks[] = {"apb_pclk1", "pclk1", "ctl0_crr",
+					       "phy0_crr", "misc_crr"};
+static const char * const lan1_pcieb_clks[] = {"apb_pclk1", "pclk1", "ctl1_crr",
+					       "phy0_crr", "misc_crr"};
+static const char * const lan2_pcieb_clks[] = {"apb_pclk2", "pclk2", "ctl1_crr",
+					       "phy1_crr", "misc_crr"};
+static const char * const lan2_sata_clks[] = {"pclk2", "epcs_tx", "epcs_rx",
+					      "phy1_crr", "misc_crr"};
+
+static const struct regmap_config regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int imx_hsio_get_idx(int phy_type, int ctrl_index, int lane_mask)
+{
+	int index;
+
+	switch (phy_type) {
+	case PHY_TYPE_PCIE:
+		if (ctrl_index) { /* PCIEB */
+			if (lane_mask == IMX8Q_HSIO_LANE0) /* i.MX8QXP */
+				index = IMX8Q_HSIO_LANE0_PCIE_PHY;
+			else if (lane_mask == IMX8Q_HSIO_LANE1) /* i.MX8QM */
+				index = IMX8Q_HSIO_LANE1_PCIE_PHY;
+			else if (lane_mask == IMX8Q_HSIO_LANE2) /* i.MX8QM */
+				index = IMX8Q_HSIO_LANE2_PHY;
+			else
+				return -EINVAL;
+		} else { /* PCIEA */
+			if (lane_mask == (IMX8Q_HSIO_LANE0 | IMX8Q_HSIO_LANE1))
+				index = IMX8Q_HSIO_LANE0_1_PCIE_PHY;
+			else if (lane_mask == IMX8Q_HSIO_LANE0)
+				index = IMX8Q_HSIO_LANE0_PCIE_PHY;
+			else
+				return -EINVAL;
+		}
+		break;
+	case PHY_TYPE_SATA:
+		index = IMX8Q_HSIO_LANE2_PHY;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return index;
+}
+
+static int imx_hsio_init(struct phy *phy)
+{
+	int ret, i;
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+	struct device *dev = priv->dev;
+
+	/* Assign clocks refer to different modes */
+	switch (pmix->phy_type) {
+	case PHY_TYPE_PCIE:
+		if (pmix->ctrl_index == 0) { /* PCIEA */
+			pmix->pmix_mode = PHY_MODE_PCIE;
+			pmix->ctrl_off = 0;
+			pmix->phy_off = 0;
+
+			for (i = 0; i < LANE_NUM_CLKS; i++) {
+				if (pmix->idx == IMX8Q_HSIO_LANE0_PCIE_PHY) {
+					pmix->lane[0].clks[i].id = lan0_pcie_clks[i];
+				} else { /* 2 lanes are bound to PCIEA */
+					pmix->lane[0].clks[i].id = lan0_pcie_clks[i];
+					pmix->lane[1].clks[i].id = lan1_pciea_clks[i];
+				}
+			}
+		} else { /* PCIEB */
+			pmix->pmix_mode = PHY_MODE_PCIE;
+			if (pmix->idx == IMX8Q_HSIO_LANE0_PCIE_PHY) {
+				/* i.MX8QXP */
+				pmix->ctrl_off = 0;
+				pmix->phy_off = 0;
+			} else {
+				/*
+				 * On i.MX8QM, only second or third lane can be
+				 * bound to PCIEB.
+				 */
+				pmix->ctrl_off = SZ_64K;
+				if (pmix->idx == IMX8Q_HSIO_LANE1_PCIE_PHY)
+					pmix->phy_off = 0;
+				else /* the third lane is bound to PCIEB */
+					pmix->phy_off = SZ_64K;
+			}
+
+			for (i = 0; i < LANE_NUM_CLKS; i++) {
+				if (pmix->idx == IMX8Q_HSIO_LANE1_PCIE_PHY)
+					pmix->lane[0].clks[i].id = lan1_pcieb_clks[i];
+				else if (pmix->idx == IMX8Q_HSIO_LANE2_PHY)
+					pmix->lane[0].clks[i].id = lan2_pcieb_clks[i];
+				else /* i.MX8QXP only has PCIEB, idx is 0 */
+					pmix->lane[0].clks[i].id = lan0_pcie_clks[i];
+			}
+		}
+		break;
+	case PHY_TYPE_SATA:
+		/* On i.MX8QM, only the third lane can be bound to SATA */
+		pmix->ctrl_off = SZ_128K;
+		pmix->pmix_mode = PHY_MODE_SATA;
+		pmix->phy_off = SZ_64K;
+
+		for (i = 0; i < LANE_NUM_CLKS; i++)
+			pmix->lane[0].clks[i].id = lan2_sata_clks[i];
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Fetch clocks and enable them */
+	ret = devm_clk_bulk_get(dev, LANE_NUM_CLKS, pmix->lane[0].clks);
+	if (ret)
+		return ret;
+	if (pmix->idx == IMX8Q_HSIO_LANE0_1_PCIE_PHY) {
+		ret = devm_clk_bulk_get(dev, LANE_NUM_CLKS, pmix->lane[1].clks);
+		if (ret)
+			return ret;
+	}
+	ret = clk_bulk_prepare_enable(LANE_NUM_CLKS, pmix->lane[0].clks);
+	if (ret)
+		return ret;
+	if (pmix->idx == IMX8Q_HSIO_LANE0_1_PCIE_PHY) {
+		/* Enable the second lane's clocks */
+		ret = clk_bulk_prepare_enable(LANE_NUM_CLKS,
+					      pmix->lane[1].clks);
+		if (ret) {
+			clk_bulk_disable_unprepare(LANE_NUM_CLKS,
+						   pmix->lane[0].clks);
+			return ret;
+		}
+	}
+
+	/* allow the clocks to stabilize */
+	usleep_range(200, 500);
+	return 0;
+}
+
+static int imx_hsio_exit(struct phy *phy)
+{
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+
+	clk_bulk_disable_unprepare(LANE_NUM_CLKS, pmix->lane[0].clks);
+	if (pmix->idx == IMX8Q_HSIO_LANE0_1_PCIE_PHY)
+		/* Disable the clocks used by sencond lane of the PHY */
+		clk_bulk_disable_unprepare(LANE_NUM_CLKS, pmix->lane[1].clks);
+
+	return 0;
+}
+
+static void imx_hsio_pcie_phy_resets(struct phy *phy)
+{
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	regmap_clear_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			  HSIO_BUTTON_RST_N);
+	regmap_clear_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			  HSIO_PERST_N);
+	regmap_clear_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			  HSIO_POWER_UP_RST_N);
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			HSIO_BUTTON_RST_N);
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			HSIO_PERST_N);
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			HSIO_POWER_UP_RST_N);
+
+	if (pmix->idx == IMX8Q_HSIO_LANE0_1_PCIE_PHY) {
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_APB_RSTN_0);
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_PIPE_RSTN_0_MASK);
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_APB_RSTN_1);
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_PIPE_RSTN_1_MASK);
+	} else if (pmix->idx == IMX8Q_HSIO_LANE1_PCIE_PHY) {
+		/* The second pmix */
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_APB_RSTN_1);
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_PIPE_RSTN_1_MASK);
+	} else {
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_APB_RSTN_0);
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_PIPE_RSTN_0_MASK);
+	}
+}
+
+static void imx_hsio_sata_phy_resets(struct phy *phy)
+{
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	/* clear PHY RST, then set it */
+	regmap_clear_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+			  HSIO_EPCS_PHYRESET_N);
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+			HSIO_EPCS_PHYRESET_N);
+
+	/* CTRL RST: SET -> delay 1 us -> CLEAR -> SET */
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0, HSIO_RESET_N);
+	udelay(1);
+	regmap_clear_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+			  HSIO_RESET_N);
+	regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0, HSIO_RESET_N);
+}
+
+static void imx_hsio_configure_clk_pad(struct phy *phy)
+{
+	bool pll = false;
+	u32 pad_mode;
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	pad_mode = priv->refclk_pad;
+	if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT) {
+		pll = true;
+		regmap_update_bits(priv->misc, HSIO_CTRL0,
+				   HSIO_IOB_A_0_TXOE | HSIO_IOB_A_0_M1M0_MASK,
+				   HSIO_IOB_A_0_TXOE | HSIO_IOB_A_0_M1M0_2);
+	}
+
+	regmap_update_bits(priv->misc, HSIO_CTRL0, HSIO_IOB_RXENA,
+			   pll ? 0 : HSIO_IOB_RXENA);
+	regmap_update_bits(priv->misc, HSIO_CTRL0, HSIO_IOB_TXENA,
+			   pll ? HSIO_IOB_TXENA : 0);
+}
+
+static int imx_hsio_power_on(struct phy *phy)
+{
+	int ret;
+	u32 val, addr, cond;
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	if (pmix->pmix_mode == PHY_MODE_PCIE)
+		imx_hsio_pcie_phy_resets(phy);
+	else /* SATA */
+		regmap_set_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+				HSIO_APB_RSTN_0);
+
+	if (priv->hsio_cfg & IMX8Q_HSIO_CFG_PCIEAX2PCIEB)
+		regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PCIE_AB_SELECT);
+	if (priv->hsio_cfg & IMX8Q_HSIO_CFG_PCIEAX2SATA)
+		regmap_set_bits(priv->misc, HSIO_CTRL0, HSIO_PHYX1_EPCS_SEL);
+
+	imx_hsio_configure_clk_pad(phy);
+
+	if (pmix->pmix_mode == PHY_MODE_SATA) {
+		regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+				HSIO_EPCS_TXDEEMP);
+		regmap_set_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+				HSIO_EPCS_TXDEEMP_SEL);
+
+		imx_hsio_sata_phy_resets(phy);
+	} else {
+		/* Toggle apb_pclk to make sure PM_REQ_CORE_RST is cleared. */
+		clk_disable_unprepare(pmix->lane[0].clks[0].clk);
+		mdelay(1);
+		ret = clk_prepare_enable(pmix->lane[0].clks[0].clk);
+		if (ret) {
+			dev_err(priv->dev, "unable to enable phy apb_pclk\n");
+			return ret;
+		}
+
+		addr = pmix->ctrl_off + HSIO_PCIE_STS0;
+		cond = HSIO_PM_REQ_CORE_RST;
+		ret = regmap_read_poll_timeout(priv->ctrl, addr, val,
+					       (val & cond) == 0,
+					       PHY_INIT_WAIT_USLEEP_MAX,
+					       PHY_INIT_WAIT_TIMEOUT);
+		if (ret) {
+			dev_err(priv->dev, "HSIO_PM_REQ_CORE_RST is set\n");
+			return ret;
+		}
+	}
+
+	/* Polling to check the PHY is ready or not. */
+	if (pmix->idx == IMX8Q_HSIO_LANE1_PCIE_PHY)
+		cond = HSIO_LANE1_TX_PLL_LOCK;
+	else
+		cond = HSIO_LANE0_TX_PLL_LOCK;
+
+	ret = regmap_read_poll_timeout(priv->phy, pmix->phy_off + HSIO_PHY_STS0,
+				       val, ((val & cond) == cond),
+				       PHY_INIT_WAIT_USLEEP_MAX,
+				       PHY_INIT_WAIT_TIMEOUT);
+	if (ret) {
+		dev_err(priv->dev, "IMX8Q PHY%d PLL lock timeout\n", pmix->idx);
+		return ret;
+	}
+	dev_info(priv->dev, "IMX8Q PHY%d PLL is locked\n", pmix->idx);
+
+	if (pmix->pmix_mode == PHY_MODE_SATA) {
+		cond = HSIO_REG48_PMA_RDY;
+		ret = read_poll_timeout(readb, val, ((val & cond) == cond),
+					PHY_INIT_WAIT_USLEEP_MAX,
+					PHY_INIT_WAIT_TIMEOUT, false,
+					priv->base + HSIO_REG48_PMA_STATUS);
+		if (ret)
+			dev_err(priv->dev, "PHY calibration is timeout\n");
+		else
+			dev_info(priv->dev, "PHY calibration is done\n");
+	}
+
+	return ret;
+}
+
+static int imx_hsio_set_mode(struct phy *phy, enum phy_mode mode,
+			     int submode)
+{
+	u32 val;
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	if (pmix->pmix_mode != mode)
+		return -EINVAL;
+
+	val = (mode == PHY_MODE_PCIE) ? HSIO_MODE_PCIE : HSIO_MODE_SATA;
+	val = FIELD_PREP(HSIO_MODE_MASK, val);
+	regmap_update_bits(priv->phy, pmix->phy_off + HSIO_CTRL0,
+			   HSIO_MODE_MASK, val);
+
+	switch (submode) {
+	case PHY_MODE_PCIE_RC:
+		val = FIELD_PREP(HSIO_DEVICE_TYPE_MASK, PCI_EXP_TYPE_ROOT_PORT);
+		break;
+	case PHY_MODE_PCIE_EP:
+		val = FIELD_PREP(HSIO_DEVICE_TYPE_MASK, PCI_EXP_TYPE_ENDPOINT);
+		break;
+	default: /* Support only PCIe EP and RC now. */
+		return 0;
+	}
+	if (submode)
+		regmap_update_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL0,
+				   HSIO_DEVICE_TYPE_MASK, val);
+
+	return 0;
+}
+
+static int imx_hsio_set_speed(struct phy *phy, int speed)
+{
+	struct imx_hsio_phy_mix *pmix = phy_get_drvdata(phy);
+	struct imx_hsio_priv *priv = pmix->priv;
+
+	regmap_update_bits(priv->ctrl, pmix->ctrl_off + HSIO_CTRL2,
+			   HSIO_LTSSM_ENABLE,
+			   speed ? HSIO_LTSSM_ENABLE : 0);
+	return 0;
+}
+
+static const struct phy_ops imx_hsio_ops = {
+	.init = imx_hsio_init,
+	.exit = imx_hsio_exit,
+	.power_on = imx_hsio_power_on,
+	.set_mode = imx_hsio_set_mode,
+	.set_speed = imx_hsio_set_speed,
+	.owner = THIS_MODULE,
+};
+
+static const struct imx_hsio_drvdata imx8qxp_hsio_drvdata = {
+	.phy_mix_num = 0x1,
+};
+
+static const struct imx_hsio_drvdata imx_hsio_drvdata = {
+	.phy_mix_num = 0x4,
+};
+
+static const struct of_device_id imx_hsio_of_match[] = {
+	{.compatible = "fsl,imx8qm-hsio", .data = &imx_hsio_drvdata},
+	{.compatible = "fsl,imx8qxp-hsio", .data = &imx8qxp_hsio_drvdata},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_hsio_of_match);
+
+static struct phy *imx_hsio_xlate(struct device *dev,
+				  const struct of_phandle_args *args)
+{
+	struct imx_hsio_priv *priv = dev_get_drvdata(dev);
+	int phy_type = args->args[0];
+	int ctrl_index = args->args[1];
+	int idx, lane_mask = args->args[2];
+
+	idx = imx_hsio_get_idx(phy_type, ctrl_index, lane_mask);
+	if (idx < 0 || idx >= priv->drvdata->phy_mix_num)
+		return ERR_PTR(-EINVAL);
+	priv->pmix[idx].phy_type = phy_type;
+	priv->pmix[idx].ctrl_index = ctrl_index;
+	priv->pmix[idx].idx = idx;
+
+	return priv->pmix[idx].phy;
+}
+
+static int imx_hsio_probe(struct platform_device *pdev)
+{
+	int i;
+	void __iomem *off;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
+	struct imx_hsio_priv *priv;
+	struct phy_provider *provider;
+
+	of_id = of_match_device(imx_hsio_of_match, dev);
+	if (!of_id)
+		return -EINVAL;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = &pdev->dev;
+	priv->drvdata = of_device_get_match_data(dev);
+
+	/* Get HSIO configuration mode */
+	of_property_read_u32(np, "fsl,hsio-cfg", &priv->hsio_cfg);
+	/* Get PHY refclk pad mode */
+	if (of_property_read_u32(np, "fsl,refclk-pad-mode", &priv->refclk_pad))
+		priv->refclk_pad = IMX8_PCIE_REFCLK_PAD_OUTPUT;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	off = devm_platform_ioremap_resource_byname(pdev, "phy");
+	priv->phy = devm_regmap_init_mmio(dev, off, &regmap_config);
+	if (IS_ERR(priv->phy))
+		return dev_err_probe(dev, PTR_ERR(priv->phy),
+				     "unable to find phy csr registers\n");
+
+	off = devm_platform_ioremap_resource_byname(pdev, "ctrl");
+	priv->ctrl = devm_regmap_init_mmio(dev, off, &regmap_config);
+	if (IS_ERR(priv->ctrl))
+		return dev_err_probe(dev, PTR_ERR(priv->ctrl),
+				     "unable to find ctrl csr registers\n");
+
+	off = devm_platform_ioremap_resource_byname(pdev, "misc");
+	priv->misc = devm_regmap_init_mmio(dev, off, &regmap_config);
+	if (IS_ERR(priv->misc))
+		return dev_err_probe(dev, PTR_ERR(priv->misc),
+				     "unable to find misc csr registers\n");
+
+	for (i = 0; i < priv->drvdata->phy_mix_num; i++) {
+		struct imx_hsio_phy_mix *pmix = &priv->pmix[i];
+		struct phy *phy;
+
+		memset(pmix, 0, sizeof(*pmix));
+
+		phy = devm_phy_create(&pdev->dev, NULL, &imx_hsio_ops);
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+
+		pmix->priv = priv;
+		pmix->phy = phy;
+		pmix->idx = i;
+		phy_set_drvdata(phy, pmix);
+	}
+
+	dev_set_drvdata(dev, priv);
+	dev_set_drvdata(&pdev->dev, priv);
+
+	provider = devm_of_phy_provider_register(&pdev->dev, imx_hsio_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver imx_hsio_driver = {
+	.probe	= imx_hsio_probe,
+	.driver = {
+		.name	= "imx8qm-hsio-phy",
+		.of_match_table	= imx_hsio_of_match,
+	}
+};
+module_platform_driver(imx_hsio_driver);
+
+MODULE_DESCRIPTION("FSL IMX8QM HSIO SERDES PHY driver");
+MODULE_LICENSE("GPL");
-- 
2.37.1




More information about the linux-arm-kernel mailing list