[PATCH v3 5/5] ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U

Arınç ÜNAL via B4 Relay devnull+arinc.unal.arinc9.com at kernel.org
Tue Apr 23 02:50:49 PDT 2024


From: Arınç ÜNAL <arinc.unal at arinc9.com>

Reorder the nodes and properties to conform to the Devicetree Sources (DTS)
Coding Style.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
 .../boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi | 92 +++++++++++-----------
 .../boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts   | 69 ++++++++--------
 2 files changed, 80 insertions(+), 81 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
index 9c7efb1c44f1..2cfaaabc7a6a 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -10,9 +10,9 @@
 
 / {
 	memory at 0 {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>,
 		      <0x88000000 0x18000000>;
+		device_type = "memory";
 	};
 
 	nvram at 1c080000 {
@@ -20,6 +20,34 @@ nvram at 1c080000 {
 		reg = <0x1c080000 0x00180000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -66,32 +94,29 @@ led-wps {
 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		button-led {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		button-reset {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		partition at 0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
 		};
 
-		button-wifi {
-			label = "Wi-Fi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		partition at 80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
 		};
 
-		button-wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		partition at 200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
 		};
 	};
 };
@@ -141,28 +166,3 @@ &usb2 {
 &usb3_phy {
 	status = "okay";
 };
-
-&nandcs {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition at 0 {
-			label = "boot";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-
-		partition at 80000 {
-			label = "nvram";
-			reg = <0x00080000 0x00180000>;
-		};
-
-		partition at 200000 {
-			label = "firmware";
-			reg = <0x00200000 0x07e00000>;
-			compatible = "brcm,trx";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
index c78f0c7b137d..a197f447fd97 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -19,13 +19,34 @@ et1macaddr: et1macaddr {
 
 	switch {
 		compatible = "realtek,rtl8365mb";
-		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
 		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		realtek,disable-leds;
 		dsa,member = <1 0>;
 
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy at 0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy at 1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy at 2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy at 3 {
+				reg = <3>;
+			};
+		};
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -69,29 +90,21 @@ fixed-link {
 				};
 			};
 		};
+	};
+};
 
-		mdio {
-			compatible = "realtek,smi-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ethphy0: ethernet-phy at 0 {
-				reg = <0>;
-			};
-
-			ethphy1: ethernet-phy at 1 {
-				reg = <1>;
-			};
+&gmac0 {
+	status = "disabled";
+};
 
-			ethphy2: ethernet-phy at 2 {
-				reg = <2>;
-			};
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
 
-			ethphy3: ethernet-phy at 3 {
-				reg = <3>;
-			};
-		};
-	};
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
 };
 
 &srab {
@@ -112,17 +125,3 @@ fixed-link {
 		};
 	};
 };
-
-&gmac0 {
-	status = "disabled";
-};
-
-&gmac1 {
-	nvmem-cells = <&et1macaddr 0>;
-	nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
-	nvmem-cells = <&et1macaddr 1>;
-	nvmem-cell-names = "mac-address";
-};

-- 
2.40.1





More information about the linux-arm-kernel mailing list