[PATCH v2 3/3] arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner at cherry.de>

Apart from the host-only usb3 controller (host2) the rk3588 also provides
two dual-role controllers. On the Tiger-Haikou combination these are
connected to the lower usb3-host port in host-only mode and the micro-usb3
port for dual-role operation.

Add the necessary controllers, phys to the Tiger-Haikou board and enable
the usb-id extcon.

Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
---
 .../boot/dts/rockchip/rk3588-tiger-haikou.dts | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
index 2aa43e7430e5..52695b6c113a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou.dts
@@ -113,6 +113,16 @@ vcc5v0_baseboard: vcc5v0-baseboard-regulator {
 		vin-supply = <&dc_12v>;
 	};
 
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
 	vcc5v0_usb: vcc5v0-usb-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_usb";
@@ -137,6 +147,10 @@ &combphy2_psu {
 	status = "okay";
 };
 
+&extcon_usb3 {
+	status = "okay";
+};
+
 &gmac0 {
 	status = "okay";
 };
@@ -199,6 +213,13 @@ haikou_keys_pin: haikou-keys-pin {
 				<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdmmc {
@@ -214,6 +235,23 @@ &sdmmc {
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
 &u2phy2 {
 	status = "okay";
 };
@@ -236,6 +274,13 @@ &uart2 {
 
 &uart5 {
 	rts-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&usbdp_phy1 {
 	status = "okay";
 };
 
@@ -249,6 +294,19 @@ &usb_host0_ohci {
 	status = "okay";
 };
 
+/* host0_xhci on Q7_USB_P1, usb3-otg port */
+&usb_host0_xhci {
+	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
+	status = "okay";
+};
+
+/* host1_xhci on Q7_USB_P0, lower usb3 port */
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
 /* host1 on Q7_USB_P3, usb2 port */
 &usb_host1_ehci {
 	status = "okay";
-- 
2.39.2