[PATCH 1/3] dt-bindings: net: mx93: add enet_clk_sel binding

[Sascha Hauer]

On Mon, Apr 22, 2024 at 10:46:17AM +0200, Steffen Trumtrar wrote:
> When the eQOS on the i.MX93 is used in RMII mode, the TX_CLK must be set
> to output mode. To do this, the ENET_CLK_SEL register must be accessed.
> This register is located in a GPR register space.
> 
> Signed-off-by: Steffen Trumtrar <s.trumtrar at pengutronix.de>
> ---
>  Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> index 4c01cae7c93a7..1d1c8b90da871 100644
> --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> @@ -56,6 +56,16 @@ properties:
>          - tx
>          - mem
>  
> +  enet_clk_sel:

Krzysztof will likely write the same in a moment, but anyway:

Please no underscores in property names, see
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |