[RFC PATCH v3 4/6] dt-bindings: clock: meson: document A1 SoC audio clock controller driver

Jerome Brunet jbrunet at baylibre.com
Mon Apr 22 00:40:48 PDT 2024


On Fri 19 Apr 2024 at 15:58, Jan Dakinevich <jan.dakinevich at salutedevices.com> wrote:

> Add device tree bindings for A1 SoC audio clock and reset controllers.
>
> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
> ---
>
> This controller has 6 mandatory and up to 20 optional clocks. To describe
> this, I use 'additionalItems'. It produces correct processed-schema.json:
>
>   "clock-names": {
>       "maxItems": 26,
>       "items": [
>           {
>               "const": "pclk"
>           },
>           {
>               "const": "dds_in"
>           },
>           {
>               "const": "fclk_div2"
>           },
>           {
>               "const": "fclk_div3"
>           },
>           {
>               "const": "hifi_pll"
>           },
>           {
>               "const": "xtal"
>           }
>       ],
>       "additionalItems": {
>           "oneOf": [
>               {
>                   "pattern": "^slv_sclk[0-9]$"
>               },
>               {
>                   "pattern": "^slv_lrclk[0-9]$"
>               }
>           ]
>       },
>       "type": "array",
>       "minItems": 6
>   },
>
> and it behaves as expected. However, the checking is followed by
> complaints like this:
>
>   Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml: properties:clock-names:additionalItems: {'oneOf': [{'pattern': '^slv_sclk[0-9]$'}, {'pattern': '^slv_lrclk[0-9]$'}]} is not of type 'boolean'
>
> And indeed, 'additionalItems' has boolean type in meta-schema. So, how to
> do it right?
> ---
>  .../bindings/clock/amlogic,a1-audio-clkc.yaml | 124 ++++++++++++++++++
>  .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 +++++++++++++++++
>  .../reset/amlogic,meson-a1-audio-reset.h      |  29 ++++
>  3 files changed, 275 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>  create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>  create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
> new file mode 100644
> index 000000000000..40a0af3635f4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/amlogic,a1-audio-clkc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic A1 Audio Clock Control Unit and Reset Controller
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong at linaro.org>
> +  - Jerome Brunet <jbrunet at baylibre.com>
> +  - Jan Dakinevich <jan.dakinevich at salutedevices.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,a1-audio-clkc
> +      - amlogic,a1-audio-vad-clkc
> +
> +  '#clock-cells':
> +    const: 1
> +
> +  '#reset-cells':
> +    const: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 26
> +    items:
> +      - description: input main peripheral bus clock
> +      - description: input dds_in
> +      - description: input fixed pll div2
> +      - description: input fixed pll div3
> +      - description: input hifi_pll
> +      - description: input oscillator (usually at 24MHz)
> +    additionalItems:
> +      oneOf:
> +        - description: slv_sclk[0-9] - slave bit clocks provided by external components
> +        - description: slv_lrclk[0-9]- slave sample clocks provided by external components
> +
> +  clock-names:
> +    maxItems: 26
> +    items:
> +      - const: pclk
> +      - const: dds_in
> +      - const: fclk_div2
> +      - const: fclk_div3
> +      - const: hifi_pll
> +      - const: xtal
> +    additionalItems:
> +      oneOf:
> +        - pattern: "^slv_sclk[0-9]$"
> +        - pattern: "^slv_lrclk[0-9]$"
> +
> +required:
> +  - compatible
> +  - '#clock-cells'
> +  - reg
> +  - clocks
> +  - clock-names
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: amlogic,a1-audio-clkc
> +    then:
> +      required:
> +        - '#reset-cells'
> +    else:
> +      properties:
> +        '#reset-cells': false
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
> +    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
> +    #include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
> +    audio {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        clkc_audio: clock-controller at fe050000 {
> +                compatible = "amlogic,a1-audio-clkc";
> +                reg = <0x0 0xfe050000 0x0 0xb0>;
> +                #clock-cells = <1>;
> +                #reset-cells = <1>;
> +                clocks = <&clkc_audio_vad AUD_CLKID_VAD_AUDIOTOP>,
> +                         <&clkc_periphs CLKID_DDS_IN>,
> +                         <&clkc_pll CLKID_FCLK_DIV2>,
> +                         <&clkc_pll CLKID_FCLK_DIV3>,
> +                         <&clkc_pll CLKID_HIFI_PLL>,
> +                         <&xtal>;
> +                clock-names = "pclk",
> +                              "dds_in",
> +                              "fclk_div2",
> +                              "fclk_div3",
> +                              "hifi_pll",
> +                              "xtal";
> +        };
> +
> +        clkc_audio_vad: clock-controller at fe054800 {
> +                compatible = "amlogic,a1-audio2-clkc";
> +                reg = <0x0 0xfe054800 0x0 0x20>;
> +                #clock-cells = <1>;
> +                clocks = <&clkc_periphs CLKID_AUDIO>,
> +                         <&clkc_periphs CLKID_DDS_IN>,
> +                         <&clkc_pll CLKID_FCLK_DIV2>,
> +                         <&clkc_pll CLKID_FCLK_DIV3>,
> +                         <&clkc_pll CLKID_HIFI_PLL>,
> +                         <&xtal>;
> +                clock-names = "pclk",
> +                              "dds_in",
> +                              "fclk_div2",
> +                              "fclk_div3",
> +                              "hifi_pll",
> +                              "xtal";
> +        };
> +    };
> diff --git a/include/dt-bindings/clock/amlogic,a1-audio-clkc.h b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
> new file mode 100644
> index 000000000000..6534d1878816
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
> @@ -0,0 +1,122 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> + *
> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
> + */
> +
> +#ifndef __A1_AUDIO_CLKC_BINDINGS_H
> +#define __A1_AUDIO_CLKC_BINDINGS_H
> +
> +#define AUD_CLKID_DDR_ARB		1
> +#define AUD_CLKID_TDMIN_A		2
> +#define AUD_CLKID_TDMIN_B		3
> +#define AUD_CLKID_TDMIN_LB		4
> +#define AUD_CLKID_LOOPBACK		5
> +#define AUD_CLKID_TDMOUT_A		6
> +#define AUD_CLKID_TDMOUT_B		7
> +#define AUD_CLKID_FRDDR_A		8
> +#define AUD_CLKID_FRDDR_B		9
> +#define AUD_CLKID_TODDR_A		10
> +#define AUD_CLKID_TODDR_B		11
> +#define AUD_CLKID_SPDIFIN		12
> +#define AUD_CLKID_RESAMPLE		13
> +#define AUD_CLKID_EQDRC			14
> +#define AUD_CLKID_LOCKER		15
> +#define AUD_CLKID_MST_A_MCLK_SEL	16
> +#define AUD_CLKID_MST_A_MCLK_DIV	17
> +#define AUD_CLKID_MST_A_MCLK		18
> +#define AUD_CLKID_MST_B_MCLK_SEL	19
> +#define AUD_CLKID_MST_B_MCLK_DIV	20
> +#define AUD_CLKID_MST_B_MCLK		21
> +#define AUD_CLKID_MST_C_MCLK_SEL	22
> +#define AUD_CLKID_MST_C_MCLK_DIV	23
> +#define AUD_CLKID_MST_C_MCLK		24
> +#define AUD_CLKID_MST_D_MCLK_SEL	25
> +#define AUD_CLKID_MST_D_MCLK_DIV	26
> +#define AUD_CLKID_MST_D_MCLK		27
> +#define AUD_CLKID_SPDIFIN_CLK_SEL	28
> +#define AUD_CLKID_SPDIFIN_CLK_DIV	29
> +#define AUD_CLKID_SPDIFIN_CLK		30
> +#define AUD_CLKID_RESAMPLE_CLK_SEL	31
> +#define AUD_CLKID_RESAMPLE_CLK_DIV	32
> +#define AUD_CLKID_RESAMPLE_CLK		33
> +#define AUD_CLKID_LOCKER_IN_CLK_SEL	34
> +#define AUD_CLKID_LOCKER_IN_CLK_DIV	35
> +#define AUD_CLKID_LOCKER_IN_CLK		36
> +#define AUD_CLKID_LOCKER_OUT_CLK_SEL	37
> +#define AUD_CLKID_LOCKER_OUT_CLK_DIV	38
> +#define AUD_CLKID_LOCKER_OUT_CLK	39
> +#define AUD_CLKID_EQDRC_CLK_SEL		40
> +#define AUD_CLKID_EQDRC_CLK_DIV		41
> +#define AUD_CLKID_EQDRC_CLK		42
> +#define AUD_CLKID_MST_A_SCLK_PRE_EN	43
> +#define AUD_CLKID_MST_A_SCLK_DIV	44
> +#define AUD_CLKID_MST_A_SCLK_POST_EN	45
> +#define AUD_CLKID_MST_A_SCLK		46
> +#define AUD_CLKID_MST_B_SCLK_PRE_EN	47
> +#define AUD_CLKID_MST_B_SCLK_DIV	48
> +#define AUD_CLKID_MST_B_SCLK_POST_EN	49
> +#define AUD_CLKID_MST_B_SCLK		50
> +#define AUD_CLKID_MST_C_SCLK_PRE_EN	51
> +#define AUD_CLKID_MST_C_SCLK_DIV	52
> +#define AUD_CLKID_MST_C_SCLK_POST_EN	53
> +#define AUD_CLKID_MST_C_SCLK		54
> +#define AUD_CLKID_MST_D_SCLK_PRE_EN	55
> +#define AUD_CLKID_MST_D_SCLK_DIV	56
> +#define AUD_CLKID_MST_D_SCLK_POST_EN	57
> +#define AUD_CLKID_MST_D_SCLK		58
> +#define AUD_CLKID_MST_A_LRCLK_DIV	59
> +#define AUD_CLKID_MST_A_LRCLK		60
> +#define AUD_CLKID_MST_B_LRCLK_DIV	61
> +#define AUD_CLKID_MST_B_LRCLK		62
> +#define AUD_CLKID_MST_C_LRCLK_DIV	63
> +#define AUD_CLKID_MST_C_LRCLK		64
> +#define AUD_CLKID_MST_D_LRCLK_DIV	65
> +#define AUD_CLKID_MST_D_LRCLK		66
> +#define AUD_CLKID_TDMIN_A_SCLK_SEL	67
> +#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN	68
> +#define AUD_CLKID_TDMIN_A_SCLK_POST_EN	69
> +#define AUD_CLKID_TDMIN_A_SCLK		70
> +#define AUD_CLKID_TDMIN_A_LRCLK		71
> +#define AUD_CLKID_TDMIN_B_SCLK_SEL	72
> +#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN	73
> +#define AUD_CLKID_TDMIN_B_SCLK_POST_EN	74
> +#define AUD_CLKID_TDMIN_B_SCLK		75
> +#define AUD_CLKID_TDMIN_B_LRCLK		76
> +#define AUD_CLKID_TDMIN_LB_SCLK_SEL	77
> +#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN	78
> +#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN	79
> +#define AUD_CLKID_TDMIN_LB_SCLK		80
> +#define AUD_CLKID_TDMIN_LB_LRCLK	81
> +#define AUD_CLKID_TDMOUT_A_SCLK_SEL	82
> +#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN	83
> +#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN	84
> +#define AUD_CLKID_TDMOUT_A_SCLK		85
> +#define AUD_CLKID_TDMOUT_A_LRCLK	86
> +#define AUD_CLKID_TDMOUT_B_SCLK_SEL	87
> +#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN	88
> +#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN	89
> +#define AUD_CLKID_TDMOUT_B_SCLK		90
> +#define AUD_CLKID_TDMOUT_B_LRCLK	91
> +
> +#define AUD_CLKID_VAD_DDR_ARB		1
> +#define AUD_CLKID_VAD_PDM		2
> +#define AUD_CLKID_VAD_TDMIN		3
> +#define AUD_CLKID_VAD_TODDR		4
> +#define AUD_CLKID_VAD			5
> +#define AUD_CLKID_VAD_AUDIOTOP		6
> +#define AUD_CLKID_VAD_MCLK_SEL		7
> +#define AUD_CLKID_VAD_MCLK_DIV		8
> +#define AUD_CLKID_VAD_MCLK		9
> +#define AUD_CLKID_VAD_CLK_SEL		10
> +#define AUD_CLKID_VAD_CLK_DIV		11
> +#define AUD_CLKID_VAD_CLK		12
> +#define AUD_CLKID_VAD_PDM_DCLK_SEL	13
> +#define AUD_CLKID_VAD_PDM_DCLK_DIV	14
> +#define AUD_CLKID_VAD_PDM_DCLK		15
> +#define AUD_CLKID_VAD_PDM_SYSCLK_SEL	16
> +#define AUD_CLKID_VAD_PDM_SYSCLK_DIV	17
> +#define AUD_CLKID_VAD_PDM_SYSCLK	18
> +

Again, please split the a1 and a1-vad controller.
They are independent and there is no reason to use a single file for them

> +#endif /* __A1_AUDIO_CLKC_BINDINGS_H */
> diff --git a/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
> new file mode 100644
> index 000000000000..653fddba1d8f
> --- /dev/null
> +++ b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
> + *
> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
> + */
> +
> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
> +#define _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
> +
> +#define AUD_RESET_DDRARB	0
> +#define AUD_RESET_TDMIN_A	1
> +#define AUD_RESET_TDMIN_B	2
> +#define AUD_RESET_TDMIN_LB	3
> +#define AUD_RESET_LOOPBACK	4
> +#define AUD_RESET_TDMOUT_A	5
> +#define AUD_RESET_TDMOUT_B	6
> +#define AUD_RESET_FRDDR_A	7
> +#define AUD_RESET_FRDDR_B	8
> +#define AUD_RESET_TODDR_A	9
> +#define AUD_RESET_TODDR_B	10
> +#define AUD_RESET_SPDIFIN	11
> +#define AUD_RESET_RESAMPLE	12
> +#define AUD_RESET_EQDRC		13
> +#define AUD_RESET_LOCKER	14
> +#define AUD_RESET_TOACODEC	30
> +#define AUD_RESET_CLKTREE	31
> +
> +#endif /* _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H */


-- 
Jerome



More information about the linux-arm-kernel mailing list