[PATCH 2/3] arm64: zynqmp: Add resets property for UART nodes

[Manikanta Guntupalli]

Add resets property for UART0 and UART1 nodes

Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli at amd.com>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 25d20d803230..935504424ec6 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -906,6 +906,7 @@ uart0: serial at ff000000 {
 			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_UART0>;
 		};
 
 		uart1: serial at ff010000 {
@@ -917,6 +918,7 @@ uart1: serial at ff010000 {
 			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_UART1>;
 		};
 
 		usb0: usb at ff9d0000 {
-- 
2.25.1