[PATCH v4 0/8] cpufreq: sun50i: Add Allwinner H616 support
Andre Przywara
andre.przywara at arm.com
Thu Apr 18 04:16:42 PDT 2024
On Thu, 04 Apr 2024 20:44:02 +1300
"Ryan Walklin" <ryan at testtoast.com> wrote:
Hi Viresh, Ryan,
> On Thu, 4 Apr 2024, at 7:40 PM, Viresh Kumar wrote:
> > Is it okay to merge all the changes via the cpufreq tree ?
>
> I have tested this series with an H700-based board, and have at least one speed-bin (1.032GHz) is not supported although the governor attempts to enable it based on the opp-supported-hw bitmask, and I am unable to reach the 1.5GHz bin at 1.16v (or higher) despite it working on the vendor BSP (kernel panic at boot if enabled), so this may need some slight rework.
>
> I have reached out to Andre on IRC to debug.
So those test results look odd, especially since it seems to work on the
BSP. I don't want to jeopardise this series over the oddity on this
variant, so I am dropping the H700 specific speed bin for now. Not
directly matching any known SoC variant now, it will fall back to bin 0,
which gives us some safe values. We lose the highest OPP (1.5 GHz),
but this was exactly the problematic one in the testing, so it's not a
great loss.
Once we have worked out what's really going on there, we can easily add a
well tested OPP set later, to get the 1.5 GHz back.
Will send a v5 shortly.
Cheers,
Andre
More information about the linux-arm-kernel
mailing list