[PATCH v2] dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema

[Conor Dooley]

On Wed, Apr 17, 2024 at 03:51:10PM +0200, Pratik Farkase wrote:
> Convert the Broadcom BCM2835 Auxiliary UART to newer DT schema.
> Created DT schema based on the .txt file which had
> `compatible`, `reg` `clocks` and `interrupts` as the
> required properties. This binding is used by Broadcom BCM2835
> SOC used in some Raspberry PI boards.
> Changes from original file:
> Implemented complete example which the original txt binding lacked.
> 
> Signed-off-by: Pratik Farkase <pratik.farkase at wsisweden.com>
> ---
> Changes in v2
> - Updated Maintainers list according to feedback
> - Fixed typo `Auxiliar` to `Auxiliary`
> ---
> ---
>  .../bindings/serial/brcm,bcm2835-aux-uart.txt | 18 -------
>  .../serial/brcm,bcm2835-aux-uart.yaml         | 48 +++++++++++++++++++
>  2 files changed, 48 insertions(+), 18 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> 
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> deleted file mode 100644
> index b5cc6297cd1b..000000000000
> --- a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
> +++ /dev/null
> @@ -1,18 +0,0 @@
> -* BCM2835 AUXILIAR UART
> -
> -Required properties:
> -
> -- compatible: "brcm,bcm2835-aux-uart"
> -- reg: The base address of the UART register bank.
> -- interrupts: A single interrupt specifier.
> -- clocks: Clock driving the hardware; used to figure out the baud rate
> -  divisor.
> -
> -Example:
> -
> -	uart1: serial at 7e215040 {
> -		compatible = "brcm,bcm2835-aux-uart";
> -		reg = <0x7e215040 0x40>;
> -		interrupts = <1 29>;
> -		clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> -	};
> diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> new file mode 100644
> index 000000000000..5d4d37371d6b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/serial/brcm,bcm2835-aux-uart.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BCM2835 AUXILIARY UART
> +
> +maintainers:
> +  - Pratik Farkase <pratikfarkase94 at gmail.com>
> +  - Florian Fainelli <florian.fainelli at broadcom.com>
> +  - Stefan Wahren <wahrenst at gmx.net>
> +
> +allOf:
> +  - $ref: serial.yaml
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm2835-aux-uart
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/bcm2835.h>
> +    #include <dt-bindings/clock/bcm2835-aux.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>

Only 1 of these headers seems used, there's only one define below.

> +    uart1: serial at 7e215040 {

The label is unused and can be dropped.

Otherwise,
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>


> +        compatible = "brcm,bcm2835-aux-uart";
> +        reg = <0x7e215040 0x40>;
> +        interrupts = <1 29>;
> +        clocks = <&aux BCM2835_AUX_CLOCK_UART>;
> +    };
> -- 
> 2.34.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20240417/091bccf7/attachment.sig>