[PATCH v2 17/18] arm64: dts: mediatek: add display blocks support for the MT8365 SoC

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Wed Apr 17 03:27:52 PDT 2024


Il 16/04/24 17:53, Alexandre Mergnat ha scritto:
> - Add aliases for each display components to help display drivers.
> - Add the Display Pulse Width Modulation (DISP_PWM) to provide PWM signals
>    for the LED driver of mobile LCM.
> - Add the MIPI Display Serial Interface (DSI) PHY support. (up to 4-lane
>    output)
> - Add the display mutex support.
> - Add the following display component support:
>    - OVL0 (Overlay)
>    - RDMA0 (Data Path Read DMA)
>    - Color0
>    - CCorr0 (Color Correction)
>    - AAL0 (Adaptive Ambient Light)
>    - GAMMA0
>    - Dither0
>    - DSI0 (Display Serial Interface)
>    - RDMA1 (Data Path Read DMA)
>    - DPI0 (Display Parallel Interface)
> 
> Signed-off-by: Alexandre Mergnat <amergnat at baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8365.dtsi | 146 +++++++++++++++++++++++++++++++
>   1 file changed, 146 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> index 24581f7410aa..a95f90da4491 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -8,6 +8,7 @@
>   #include <dt-bindings/clock/mediatek,mt8365-clk.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
>   #include <dt-bindings/phy/phy.h>
>   #include <dt-bindings/power/mediatek,mt8365-power.h>
>   
> @@ -17,6 +18,19 @@ / {
>   	#address-cells = <2>;
>   	#size-cells = <2>;
>   
> +	aliases {
> +		aal0 = &aal0;
> +		ccorr0 = &ccorr0;
> +		color0 = &color0;
> +		dither0 = &dither0;
> +		dpi0 = &dpi0;
> +		dsi0 = &dsi0;
> +		gamma0 = &gamma0;
> +		ovl0 = &ovl0;
> +		rdma0 = &rdma0;
> +		rdma1 = &rdma1;
> +	};
> +
>   	cpus {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
> @@ -607,6 +621,17 @@ spi: spi at 1100a000 {
>   			status = "disabled";
>   		};
>   
> +		disp_pwm: pwm at 1100e000 {
> +			compatible = "mediatek,mt8365-disp-pwm",
> +				     "mediatek,mt8183-disp-pwm";

Fits in a single line

> +			reg = <0 0x1100e000 0 0x1000>;
> +			clock-names = "main", "mm";
> +			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
> +				 <&infracfg CLK_IFR_DISP_PWM>;

same

> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +			#pwm-cells = <2>;
> +		};
> +
>   		i2c3: i2c at 1100f000 {
>   			compatible = "mediatek,mt8365-i2c", "mediatek,mt8168-i2c";
>   			reg = <0 0x1100f000 0 0xa0>, <0 0x11000200 0 0x80>;
> @@ -703,6 +728,15 @@ ethernet: ethernet at 112a0000 {
>   			status = "disabled";
>   		};
>   
> +		mipi_tx0: dsi-phy at 11c00000 {
> +			compatible = "mediatek,mt8365-mipi-tx", "mediatek,mt8183-mipi-tx";
> +			reg = <0 0x11c00000 0 0x800>;
> +			clock-output-names = "mipi_tx0_pll";
> +			clocks = <&clk26m>;
> +			#clock-cells = <0>;
> +			#phy-cells = <0>;
> +		};
> +
>   		u3phy: t-phy at 11cc0000 {
>   			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
>   			#address-cells = <1>;
> @@ -732,6 +766,13 @@ mmsys: syscon at 14000000 {
>   			#clock-cells = <1>;
>   		};
>   
> +		mutex: mutex at 14001000 {
> +			compatible =  "mediatek,mt8365-disp-mutex";
> +			reg = <0 0x14001000 0 0x1000>;
> +			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +		};
> +
>   		smi_common: smi at 14002000 {
>   			compatible = "mediatek,mt8365-smi-common";
>   			reg = <0 0x14002000 0 0x1000>;
> @@ -755,6 +796,111 @@ larb0: larb at 14003000 {
>   			mediatek,larb-id = <0>;
>   		};
>   
> +		ovl0: ovl at 1400b000 {
> +			compatible = "mediatek,mt8365-disp-ovl",
> +				     "mediatek,mt8192-disp-ovl";

single line

> +			reg = <0 0x1400b000 0 0x1000>;
> +			clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
> +			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
> +			iommus = <&iommu M4U_PORT_DISP_OVL0>;
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +		};
> +
> +		rdma0: rdma at 1400d000 {
> +			compatible = "mediatek,mt8365-disp-rdma",
> +				     "mediatek,mt8183-disp-rdma";

ditto

> +			reg = <0 0x1400d000 0 0x1000>;
> +			clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
> +			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
> +			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
> +			mediatek,rdma-fifo-size = <5120>;
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +		};
> +
> +		color0: color at 1400f000 {
> +			compatible = "mediatek,mt8365-disp-color",
> +				     "mediatek,mt8173-disp-color";

...and all the others too (maybe not all, it's fine until 100 cols anyway)


Cheers,
Angelo




More information about the linux-arm-kernel mailing list