[PATCH v6 00/11] CFI for ARM32 using LLVM
Linus Walleij
linus.walleij at linaro.org
Wed Apr 17 01:30:49 PDT 2024
This is a first patch set to support CLANG CFI (Control Flow
Integrity) on ARM32.
For information about what CFI is, see:
https://clang.llvm.org/docs/ControlFlowIntegrity.html
For the kernel KCFI flavor, see:
https://lwn.net/Articles/898040/
The base changes required to bring up KCFI on ARM32 was mostly
related to the use of custom vtables in the kernel, combined
with defines to call into these vtable members directly from
sites where they are used.
We annotate all assembly calls that are called directly from
C with SYM_TYPED_FUNC_START()/SYM_FUNC_END() so it is easy
to see while reading the assembly that these functions are
called from C and can have CFI prototype information prefixed
to them.
As protype prefix information is just some random bytes, it is
not possible to "fall through" into an assembly function that
is tagged with SYM_TYPED_FUNC_START(): there will be some
binary noise in front of the function so this design pattern
needs to be explicitly avoided at each site where it occurred.
The approach to binding the calls to C is two-fold:
- Either convert the affected vtable struct to C and provide
per-CPU prototypes for all the calls (done for TLB, cache)
or:
- Provide prototypes in a special files just for CFI and tag
all these functions addressable.
The permissive mode handles the new breakpoint type (0x03) that
LLVM CLANG is emitting.
To runtime-test the patches:
- Enable CONFIG_LKDTM
- echo CFI_FORWARD_PROTO > /sys/kernel/debug/provoke-crash/DIRECT
The patch set has been booted to userspace on the following
test platforms:
- Arm Versatile (QEMU)
- Arm Versatile Express (QEMU)
- multi_v7 booted on Versatile Express (QEMU)
- Footbridge Netwinder (SA110 ARMv4)
- Ux500 (ARMv7 SMP)
- Gemini (FA526)
I am not saying there will not be corner cases that we need
to fix in addition to this, but it is enough to get started.
Looking at what was fixed for arm64 I am a bit weary that
e.g. BPF might need something to trampoline properly.
But hopefullt people can get to testing it and help me fix
remaining issues before the final version, or we can fix it
in-tree.
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
Changes in v6:
- Add a separate patch adding aliases for some cache functions
that were just branches to another function.
- Link to v5: https://lore.kernel.org/r/20240415-arm32-cfi-v5-0-ff11093eeccc@linaro.org
Changes in v5:
- I started to put the patches into the patch tracker and it
rightfully complained that the patches tagging all assembly
with CFI symbol type macros and adding C prototypes were
too large.
- Split the two patches annotating assembly into one patch
doing the annotation and one patch adding the C prototypes.
This is a good split anyway.
- The first patches from the series are unchanged and in the
patch tracker, I resend them anyway and will soon populate
the patch tracker with the split patches from this
series unless there are more comments.
- Link to v4: https://lore.kernel.org/r/20240328-arm32-cfi-v4-0-a11046139125@linaro.org
Changes in v4:
- Rebase on v6.9-rc1
- Use Ard's patch for converting TLB operation vtables to C
- Rewrite the cache vtables in C and use SYM_SYM_TYPED_FUNC in the
assembly to make CFI work all the way down.
- Instead of tagging all the delay functions as __nocfi get to the
root cause and annotate the loop delay code with SYM_TYPED_FUNC_START()
and rewrite it using explicit branches so we get CFI all the way
down.
- Drop the patch turning highmem page accesses into static inlines:
this was probably a development artifact since this code does
a lot of cache and TLB flusing, and that assembly is now properly
annotated.
- Do not define static inlines tagged __nocfi for all the proc functions,
instead provide proper C prototypes in a separate CFI-only file
and make these explicitly addressable.
- Link to v3: https://lore.kernel.org/r/20240311-arm32-cfi-v3-0-224a0f0a45c2@linaro.org
Changes in v3:
- Use report_cfi_failure() like everyone else in the breakpoint
handler.
- I think we cannot implement target and type for the report callback
without operand bundling compiler extensions, so just leaving these as zero.
- Link to v2: https://lore.kernel.org/r/20240307-arm32-cfi-v2-0-cc74ea0306b3@linaro.org
Changes in v2:
- Add the missing ftrace graph tracer stub.
- Enable permissive mode using a breakpoint handler.
- Link to v1: https://lore.kernel.org/r/20240225-arm32-cfi-v1-0-6943306f065b@linaro.org
---
Ard Biesheuvel (1):
ARM: mm: Make tlbflush routines CFI safe
Linus Walleij (10):
ARM: bugs: Check in the vtable instead of defined aliases
ARM: ftrace: Define ftrace_stub_graph
ARM: mm: Type-annotate all cache assembly routines
ARM: mm: Use symbol alias for two cache functions
ARM: mm: Rewrite cacheflush vtables in CFI safe C
ARM: mm: Type-annotate all per-processor assembly routines
ARM: mm: Define prototypes for all per-processor calls
ARM: lib: Annotate loop delay instructions for CFI
ARM: hw_breakpoint: Handle CFI breakpoints
ARM: Support CLANG CFI
arch/arm/Kconfig | 1 +
arch/arm/include/asm/glue-cache.h | 28 +-
arch/arm/include/asm/hw_breakpoint.h | 1 +
arch/arm/kernel/bugs.c | 2 +-
arch/arm/kernel/entry-ftrace.S | 4 +
arch/arm/kernel/hw_breakpoint.c | 30 ++
arch/arm/lib/delay-loop.S | 16 +-
arch/arm/mm/Makefile | 3 +
arch/arm/mm/cache-b15-rac.c | 1 +
arch/arm/mm/cache-fa.S | 43 ++-
arch/arm/mm/cache-nop.S | 61 ++--
arch/arm/mm/cache-v4.S | 53 ++-
arch/arm/mm/cache-v4wb.S | 43 +--
arch/arm/mm/cache-v4wt.S | 51 ++-
arch/arm/mm/cache-v6.S | 47 ++-
arch/arm/mm/cache-v7.S | 72 ++--
arch/arm/mm/cache-v7m.S | 53 ++-
arch/arm/mm/cache.c | 663 +++++++++++++++++++++++++++++++++++
arch/arm/mm/proc-arm1020.S | 65 ++--
arch/arm/mm/proc-arm1020e.S | 66 ++--
arch/arm/mm/proc-arm1022.S | 65 ++--
arch/arm/mm/proc-arm1026.S | 66 ++--
arch/arm/mm/proc-arm720.S | 25 +-
arch/arm/mm/proc-arm740.S | 26 +-
arch/arm/mm/proc-arm7tdmi.S | 34 +-
arch/arm/mm/proc-arm920.S | 72 ++--
arch/arm/mm/proc-arm922.S | 65 ++--
arch/arm/mm/proc-arm925.S | 62 ++--
arch/arm/mm/proc-arm926.S | 71 ++--
arch/arm/mm/proc-arm940.S | 65 ++--
arch/arm/mm/proc-arm946.S | 61 ++--
arch/arm/mm/proc-arm9tdmi.S | 26 +-
arch/arm/mm/proc-fa526.S | 24 +-
arch/arm/mm/proc-feroceon.S | 101 +++---
arch/arm/mm/proc-macros.S | 33 --
arch/arm/mm/proc-mohawk.S | 70 ++--
arch/arm/mm/proc-sa110.S | 23 +-
arch/arm/mm/proc-sa1100.S | 31 +-
arch/arm/mm/proc-v6.S | 31 +-
arch/arm/mm/proc-v7-2level.S | 8 +-
arch/arm/mm/proc-v7-3level.S | 8 +-
arch/arm/mm/proc-v7-bugs.c | 4 +-
arch/arm/mm/proc-v7.S | 66 ++--
arch/arm/mm/proc-v7m.S | 41 +--
arch/arm/mm/proc-xsc3.S | 71 ++--
arch/arm/mm/proc-xscale.S | 125 +++----
arch/arm/mm/proc.c | 500 ++++++++++++++++++++++++++
arch/arm/mm/tlb-fa.S | 12 +-
arch/arm/mm/tlb-v4.S | 15 +-
arch/arm/mm/tlb-v4wb.S | 12 +-
arch/arm/mm/tlb-v4wbi.S | 12 +-
arch/arm/mm/tlb-v6.S | 12 +-
arch/arm/mm/tlb-v7.S | 14 +-
arch/arm/mm/tlb.c | 84 +++++
54 files changed, 2266 insertions(+), 972 deletions(-)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240115-arm32-cfi-65d60f201108
Best regards,
--
Linus Walleij <linus.walleij at linaro.org>
More information about the linux-arm-kernel
mailing list